See what your study plan could look like
Based on this guide's real question bank — 475 practice questions across 16 units. Slide to match your situation.
Unit 1: Matter & Change
▾Classification of matter
- Element: one atom type; cannot be broken down chemically (Fe, O₂, Cu, Ne)
- Compound: two or more elements chemically bonded in fixed ratio; separated only by chemical means (H₂O, NaCl, CO₂)
- Homogeneous mixture (solution): uniform throughout, single phase (salt water, air, brass, vinegar)
- Heterogeneous mixture: non-uniform, visible different parts (sand+water, salad, granite, blood)
- Colloid: particles 1–1000 nm; Tyndall effect (milk, fog, gelatin) — between solution and suspension
- Suspension: particles >1000 nm; settles on standing; filtered easily (muddy water, Italian dressing)
Separation techniques
- Filtration: separates insoluble solid from liquid (sand from water; coffee grounds from liquid)
- Distillation: separates two miscible liquids with different boiling points (alcohol from water; crude oil refining)
- Evaporation/crystallization: recovers dissolved solid from solution (salt from seawater)
- Chromatography: separates dissolved substances by polarity/affinity differences (ink pigments, amino acids)
- Magnetism: separates magnetic material from non-magnetic (iron filings from sand)
- Centrifugation: separates by density using centrifugal force (cream from milk; blood components)
Allotropes
- O₂ (oxygen) and O₃ (ozone): same element (oxygen), different molecular structures → different properties. O₃ is more reactive and has a distinct smell.
- Diamond and graphite: both pure carbon, but different bonding structures → diamond is hardest known substance; graphite is soft and conducts electricity
- White phosphorus (P₄) and red phosphorus: both pure P, different properties
- Key point: allotropes of the same element have DIFFERENT molecular structures AND DIFFERENT properties
- They have the same atomic number and are made of the same type of atom — only the bonding arrangement differs
Chemical vs physical change
- Physical changes: melting, boiling, freezing, dissolving, cutting, crushing, bending, mixing
- Chemical change indicators: color change, gas produced (bubbles), precipitate formed, irreversible temperature change, light/sound emitted, new odor
- Dissolving is PHYSICAL — NaCl in water is still NaCl; evaporate the water and you get NaCl back
- Burning is CHEMICAL — cellulose → CO₂ + H₂O; cannot recover the wood
- Rusting is CHEMICAL — Fe + O₂ → Fe₂O₃; new substance with new properties
Physical vs chemical properties
- Physical property: observable without changing composition — color, density, melting point, boiling point, conductivity, solubility, hardness, odor
- Chemical property: describes how a substance reacts — flammability, reactivity with acids, ability to corrode, toxicity
- Intensive property: independent of sample size — density, temperature, melting point, color, concentration
- Extensive property: depends on amount — mass, volume, length, heat content
% error = |measured − accepted| / accepted × 100
Unit 2: Measurements & Math
▾Significant figures
- Non-zero digits: ALWAYS significant (245 → 3 sig figs)
- Leading zeros: NEVER significant (0.0034 → 2 sig figs)
- Captive zeros (between nonzeros): ALWAYS significant (2005 → 4 sig figs)
- Trailing zeros WITH decimal point: significant (2.500 → 4 sig figs; 100. → 3 sig figs)
- Trailing zeros WITHOUT decimal: ambiguous (1500 → 2 sig figs; write 1.500×10³ for 4 sig figs)
- Exact numbers (counted/defined): infinite sig figs (12 eggs, 100 cm = 1 m)
Sig figs in calculations
- Multiply/divide: answer has fewest sig figs of any factor (2.5 × 3.45 = 8.6, not 8.625)
- Add/subtract: answer has fewest DECIMAL PLACES (12.5 + 3.45 = 16.0, not 15.95)
- Mixed: follow order of operations, apply sig fig rule at each step
Accuracy vs precision
- Accuracy: closeness to the true/accepted value → measured by % error
- Precision: closeness of repeated measurements to each other → measured by range/deviation
- High precision, low accuracy: consistent but wrong (systematic error)
- High accuracy, low precision: correct on average but scattered (random error)
- Calibration improves accuracy; technique improves precision
Mole concept
- 1 mol = 6.02×10²³ particles (atoms, molecules, ions, formula units)
- 1 mol of any substance = its molar mass in grams (e.g., 1 mol H₂O = 18.0 g)
- Moles→particles: × 6.02×10²³ | Particles→moles: ÷ 6.02×10²³
- Moles→grams: × GFM | Grams→moles: ÷ GFM
- GFM (gram formula mass) = sum of all atomic masses in formula
- Example: GFM of Ca(NO₃)₂ = 40.1 + 2(14.0 + 3×16.0) = 164.1 g/mol
Scientific notation & dimensional analysis
- Scientific notation: M × 10ⁿ where 1 ≤ M < 10 (e.g., 0.00034 = 3.4×10⁻⁴)
- Dimensional analysis: cancel units by writing conversion factors as fractions
- Always write units with every number; check that unwanted units cancel
- Example: 5.0 km × (1000 m/1 km) × (100 cm/1 m) = 5.0×10⁵ cm
% error = |measured − accepted| / accepted × 100
1 mol = 6.02×10²³ particles
Unit 3: Atomic Concepts
▾History of atomic models
- Dalton (1803): solid, indivisible sphere — explained fixed mass ratios; no substructure
- Thomson (1897): plum pudding — discovered electrons via cathode ray tube; positive sphere with embedded e⁻
- Rutherford (1911): nuclear model — gold foil experiment; dense positive nucleus, mostly empty space; most α passed through, few deflected back
- Bohr (1913): planetary/shell model — electrons in fixed circular orbits at set energy levels; explained hydrogen bright-line spectrum
- Wave-mechanical (quantum) model (current): electrons in probability clouds (orbitals), not fixed paths; explains all elements' spectra
Subatomic particles
- Proton: charge +1, mass ≈1 amu, located in nucleus; atomic number = number of protons = element identity
- Neutron: charge 0, mass ≈1 amu, located in nucleus; number of neutrons = mass number − atomic number
- Electron: charge −1, mass ≈0 amu (1/1836 of proton), in orbitals outside nucleus
- Neutral atom: protons = electrons
- Cation (+): atom LOST electrons (Na → Na⁺ lost 1 e⁻)
- Anion (−): atom GAINED electrons (Cl → Cl⁻ gained 1 e⁻)
Electron configuration
- s sublevel: max 2 e⁻ (1 orbital) | p: max 6 e⁻ (3 orbitals) | d: max 10 e⁻ (5 orbitals) | f: max 14 e⁻ (7 orbitals)
- Fill order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p
- Ground state: lowest energy config (unique to each element, matches position on periodic table)
- Excited state: electron absorbed energy and moved to a higher sublevel — total e⁻ count still equals atomic number
- Special exceptions to know: Cr (24) = [Ar] 3d⁵ 4s¹; Cu (29) = [Ar] 3d¹⁰ 4s¹ (half-filled/filled d is extra stable)
Isotopes & atomic mass
- Isotope notation: ᴬ_Z X or element-mass (e.g., ¹²₆C or Carbon-12)
- Same: atomic number, number of protons, chemical behavior, element identity
- Different: mass number, number of neutrons, nuclear stability, physical mass
- Atomic mass (on periodic table) = weighted average of all isotopes' masses × their natural abundances
- Example: Cl has two isotopes — Cl-35 (75.77%) and Cl-37 (24.23%) → avg = 35.5 amu
Bright-line spectra
- Each element has a unique bright-line spectrum (used to identify elements in stars, flames)
- Continuous spectrum: all wavelengths (white light through prism)
- Bright-line (emission) spectrum: only specific wavelengths emitted
- Higher jump → shorter wavelength → higher frequency → more energy
- EM spectrum order (low→high energy): radio, microwave, infrared, visible (ROYGBIV), UV, X-ray, gamma
- c = λν: speed of light = wavelength × frequency
Neutrons = mass number − atomic number
c = λν
Rutherford gold-foil experiment — most α particles pass through (empty space); a few deflect off the dense positive nucleus.
Unit 4: Periodic Table
▾Organization & groups
- Period (row): elements in same period have same number of electron shells
- Group/family (column): elements with same number of valence electrons, similar chemical properties
- Group 1 (Alkali metals): 1 valence e⁻, very reactive, +1 ions, react violently with water
- Group 2 (Alkaline earth): 2 valence e⁻, reactive, +2 ions
- Groups 3–12 (Transition metals): variable oxidation states, colored compounds, use Table S for charges
- Group 17 (Halogens): 7 valence e⁻, most reactive nonmetals, form −1 ions, diatomic molecules
- Group 18 (Noble gases): full valence shell (8 e⁻, or 2 for He), nonreactive, monatomic
Metals, nonmetals, metalloids
- Metals (~75% of elements): shiny luster, malleable, ductile, good conductors of heat & electricity, lose electrons to form cations
- Nonmetals (upper right): dull/brittle, poor conductors (except graphite), gain/share electrons, form anions or covalent bonds
- Metalloids (B, Si, Ge, As, Sb, Te — along the staircase): intermediate properties; semiconductors used in electronics
- Hydrogen: unique — placed in Group 1 but is a nonmetal gas; can behave as +1 or −1
Periodic trends
- Atomic radius: DECREASES left→right (more protons, same shell), INCREASES top→bottom (more shells)
- Ionization energy (energy to remove 1 e⁻): INCREASES left→right, DECREASES top→bottom
- Electronegativity (pull on shared electrons): INCREASES left→right, DECREASES top→bottom; highest = F (4.0); lowest = Fr
- Metallic character: DECREASES left→right, INCREASES top→bottom (opposite of EN)
- Ionic radius: cations are SMALLER than parent atom (lost e⁻, same protons pull fewer e⁻ closer); anions are LARGER (gained e⁻, same protons spread over more e⁻)
Transition metal naming (Roman numerals)
- Format: metal name (Roman numeral) anion name — e.g., Iron(II) chloride = FeCl₂ (Fe²⁺); Iron(III) chloride = FeCl₃ (Fe³⁺)
- The Roman numeral = the oxidation state/charge of the transition metal in that compound
- To find the Roman numeral: use the anion charge to figure out what the metal charge must be so everything sums to zero
- FeCl₂: Cl = −1 (×2 = −2) → Fe = +2 → iron(II). FeCl₃: Cl = −1 (×3 = −3) → Fe = +3 → iron(III)
- PdO: O = −2 → Pd = +2 → palladium(II) oxide
- CuO = copper(II) oxide; Cu₂O = copper(I) oxide — same elements, different ratios, different names
- Common transition metals with multiple charges: Fe (2+,3+), Cu (1+,2+), Cr (2+,3+,6+), Mn (2+,4+,7+), Pb (2+,4+), Sn (2+,4+)
Valence electrons & ion charges
- Main-group valence electrons = group number (Group 1 = 1, Group 2 = 2, Group 13 = 3 ... Group 18 = 8)
- Metals lose valence electrons to reach noble gas config → cations
- Nonmetals gain electrons to fill valence shell → anions
- Isoelectronic: same electron configuration (Na⁺, Mg²⁺, Ne, O²⁻, F⁻ all have 10 electrons)
- Transition metals: use Table S — most have multiple possible charges (Fe²⁺/Fe³⁺, Cu⁺/Cu²⁺)
Coulomb's Law: F = k(q₁q₂)/r²
Periodic trends: atomic radius grows ↓ and ←. Ionization energy and electronegativity grow ↑ and → (toward F in the top-right).
Unit 5: Chemical Bonding
▾Bond types
- Ionic (ΔEN ≥ 1.7): metal + nonmetal; electron TRANSFER; forms ions; electrostatic attraction (NaCl, MgO, CaF₂)
- Polar covalent (ΔEN 0.4–1.7): nonmetal + nonmetal of different EN; UNEQUAL sharing; δ⁺ and δ⁻ partial charges (HF, H₂O, NH₃, HCl)
- Nonpolar covalent (ΔEN <0.4): same element or very similar EN; EQUAL sharing (Cl₂, O₂, N₂, CH₄, C-C bonds)
- Metallic: sea of delocalized valence electrons around fixed positive metal ion cores; explains conductivity, malleability, luster
Lewis dot structures
- Octet rule: most atoms want 8 valence electrons in bonds + lone pairs (exceptions: H = 2, B = 6, expanded octets for period 3+)
- Single bond = 2 shared electrons; double bond = 4; triple bond = 6
- Lone pairs count toward octet but are not bonding
- Resonance: when multiple valid Lewis structures exist (O₃, NO₃⁻, SO₄²⁻) — actual structure is average
- Formal charge: valence e⁻ − (lone pair e⁻ + ½ bonding e⁻) — minimize on each atom
VSEPR & molecular geometry
- 2 electron groups: linear (180°) — CO₂, BeCl₂
- 3 groups, 0 lone pairs: trigonal planar (120°) — BF₃, SO₃
- 4 groups, 0 lone pairs: tetrahedral (109.5°) — CH₄, CCl₄
- 4 groups, 1 lone pair: trigonal pyramidal (107°) — NH₃
- 4 groups, 2 lone pairs: bent/V-shaped (104.5°) — H₂O
- Lone pairs compress bond angles
Molecular polarity
- CO₂: linear → dipoles cancel → nonpolar molecule (despite polar C=O bonds)
- H₂O: bent → dipoles don't cancel → polar molecule
- CH₄: tetrahedral, symmetric → nonpolar
- NH₃: pyramidal, asymmetric → polar
- CCl₄: tetrahedral, symmetric → nonpolar despite polar C-Cl bonds
- CHCl₃: tetrahedral but asymmetric → polar
Compounds with BOTH ionic and covalent bonds
- Rule: if the formula contains a polyatomic ion, it has both bond types
- KClO₂ (potassium chlorite): K⁺ and ClO₂⁻ are held by IONIC bonds; inside ClO₂⁻ the Cl−O bonds are COVALENT
- NaOH: Na⁺ and OH⁻ ionic; O−H inside hydroxide is covalent
- Ca(NO₃)₂: Ca²⁺ and NO₃⁻ ionic; N−O bonds inside nitrate are covalent
- NH₄Cl: NH₄⁺ and Cl⁻ ionic; N−H inside ammonium are covalent
- Pure ionic only: CaCl₂, NaCl, MgO, Li₂S (no polyatomic ions)
- Pure covalent only: H₂O, CO₂, CH₄, HCl (no ions at all)
Network solids & properties
- Network covalent solid: atoms covalently bonded throughout in a giant network — diamond (C), quartz (SiO₂), graphite
- Very high melting points; hard; poor conductors (except graphite which conducts along layers)
- Ionic solids: high MP, hard, brittle, conduct when molten or dissolved, NOT as solid
- Molecular solids: low MP, soft, poor conductors (IMFs hold together, not ionic/covalent bonds)
- Metallic solids: variable MP, malleable, ductile, excellent conductors
Criss-cross rule: swap charge magnitudes as subscripts, reduce to simplest ratio
Molecular polarity: CO₂ is linear (symmetric → nonpolar); H₂O is bent (asymmetric → polar).
Unit 6: Chemical Quantities
▾Molar mass (GFM)
- Example: H₂O = 2(1.0) + 16.0 = 18.0 g/mol
- Example: Ca(NO₃)₂ = 40.1 + 2(14.0 + 3×16.0) = 164.1 g/mol
- Parentheses mean multiply: Ca(OH)₂ has 2 O and 2 H from the (OH) group
- GFM bridges grams ↔ moles
Percent composition
- % element = (total mass of that element in 1 mol / GFM) × 100
- Example: % H in H₂O = (2×1.0)/18.0 × 100 = 11.1%
- Sum of all % compositions = 100% (good check)
Empirical & molecular formulas
- Empirical steps: (1) % → g (assume 100 g); (2) g ÷ molar mass → moles; (3) ÷ by smallest; (4) × to get whole numbers
- Molecular formula: n = molecular mass ÷ empirical formula mass; multiply subscripts by n
- Example: empirical CH₂ (mass=14), molecular mass=56 → n=4 → C₄H₈
- Empirical and molecular can be identical (H₂O, CO₂, CH₄)
Stoichiometry — the 4-step roadmap
- Step 1 (Given → mol): divide grams of given substance by its GFM
- Step 2 (Mole ratio): multiply by the coefficient ratio from the balanced equation (wanted ÷ given)
- Step 3 (mol → wanted): multiply by GFM of wanted substance (for mass) OR by 6.02×10²³ (for particles) OR by 22.4 L (for gas at STP)
- Mass→mass example: 2H₂ + O₂ → 2H₂O. How many g H₂O from 4.0 g H₂? → 4.0/2.0 = 2.0 mol H₂ × (2 mol H₂O/2 mol H₂) × 18.0 g/mol = 36 g H₂O
- Mass→volume (STP): g ÷ GFM × 22.4 L/mol = liters of gas at STP
- Mass→particles: g ÷ GFM × 6.02×10²³ = number of particles
Limiting & excess reagent
- Method: convert BOTH reactants to moles of product; whichever gives LESS product is the limiting reagent
- Example: 4 mol H₂ and 3 mol O₂ react (2H₂+O₂→2H₂O). H₂ gives 4 mol H₂O; O₂ gives 6 mol H₂O → H₂ is limiting (gives less)
- Excess reagent: the reactant that is NOT used up; some is left over after the reaction
- Amount of excess = initial moles − moles consumed by limiting reagent × stoichiometric ratio
- Theoretical yield = max product from the limiting reagent
- % yield = (actual yield / theoretical yield) × 100 — cannot exceed 100%
- Causes of <100% yield: incomplete reaction, side reactions, product lost during transfer/purification
Mole–mole, mole–volume, and volume–volume
- Mole–mole: use coefficient ratio directly (2 mol H₂ : 1 mol O₂ : 2 mol H₂O)
- Mole–volume at STP: 1 mol any ideal gas = 22.4 L; use as a conversion factor
- Volume–volume at STP (Gay-Lussac): gas volumes combine in same ratio as coefficients — 2 L H₂ + 1 L O₂ → 2 L H₂O
- Example: 3 L N₂ + 9 L H₂ → 6 L NH₃ (ratio maintained: 1:3:2)
Hydrates
- Formula written as: ionic compound · nH₂O (e.g., CuSO₄·5H₂O = copper(II) sulfate pentahydrate)
- % water = (mass of H₂O per formula unit / total molar mass) × 100
- Heating a hydrate drives off water of crystallization → anhydrous compound remains
- Mass lost when heated = mass of water in the hydrate
- To find n: (mass lost / 18.0) ÷ (remaining mass / GFM of anhydrous salt)
% composition = (mass of part / total mass) × 100
$n_{molecular} = MW / EFM$
% yield = (actual/theoretical) × 100
1 mol gas at STP = 22.4 L
g given ÷ $GFM_{given}$ × (mol wanted/mol given) × $GFM_{wanted}$ = g wanted
Unit 7: Chemical Reactions
▾Reaction types
- Synthesis (combination): A + B → AB (2H₂ + O₂ → 2H₂O)
- Decomposition: AB → A + B (2H₂O → 2H₂ + O₂; CaCO₃ → CaO + CO₂)
- Single replacement: A + BC → AC + B (Zn + CuSO₄ → ZnSO₄ + Cu) — use Table J
- Double replacement (metathesis): AB + CD → AD + CB — ions switch partners (NaCl + AgNO₃ → AgCl↓ + NaNO₃)
- Combustion: CₓHᵧ + O₂ → CO₂ + H₂O (complete combustion); CO or C produced if incomplete
- Neutralization: acid + base → salt + water (special case of double replacement)
Balancing equations
- Only change COEFFICIENTS — NEVER subscripts (changing subscripts changes the substance)
- Strategy: balance metals first → nonmetals → H → O
- Diatomic elements (H₂, N₂, O₂, F₂, Cl₂, Br₂, I₂) — don't forget the subscript 2
- Check: same number of each atom on both sides AND total charge balanced for ionic equations
Activity series & solubility rules
- Table J (Activity series): single replacement is spontaneous only if the replacing element is HIGHER on the list
- Halogens: F > Cl > Br > I (each displaces those below it)
- If replacing element is LOWER → NR (no reaction)
- Table F (Solubility): predicts precipitates in double replacement
- Precipitate forms when product is listed as insoluble — write ↓ after its formula
- Most nitrates (NO₃⁻), alkali metals, and NH₄⁺ compounds are soluble
Net ionic equations
- Full ionic equation: write all soluble ionic compounds as separated ions
- Spectator ions: appear on both sides unchanged — cancel them out
- Net ionic equation: shows only species that actually change / react
- Example: Pb²⁺(aq) + 2I⁻(aq) → PbI₂(s) (spectators Na⁺ and NO₃⁻ cancelled)
% yield = actual/theoretical × 100
Unit 8: Phases of Matter
▾States of matter & particle motion
- Solid: particles in fixed positions, vibrate in place; definite shape & volume; incompressible
- Liquid: particles close but mobile; definite volume, no definite shape; slightly compressible
- Gas: particles far apart, random rapid motion; no definite shape or volume; highly compressible
- Plasma: high-energy ionized gas (4th state) — present in stars, lightning, fluorescent lights
- Temperature = average kinetic energy of particles; KE = ½mv²
Potential energy during phase changes & evaporation
- During a phase change (melting, boiling): KE (temperature) stays CONSTANT; PE INCREASES as particles overcome intermolecular forces
- During evaporation: PE of water molecules INCREASES as they escape the liquid — they overcome attractive forces between molecules
- The molecules that evaporate are the HIGH-energy ones — this lowers the average KE of the remaining liquid → evaporative cooling
- Heat flows from HOT to COLD — always from higher temperature to lower temperature
- Evaporation is endothermic: the liquid absorbs energy (cools down) as molecules escape
- Condensation is exothermic: gas → liquid releases energy (warms surroundings)
Experimental design in lab questions
- Control group: the group where the independent variable is NOT applied — establishes a baseline for comparison
- Independent variable: what the experimenter deliberately changes
- Dependent variable: what is measured/observed as a result
- A dry towel (no water) in an evaporation experiment = control — shows temperature change is due to evaporation, not other factors
- 'State why the student left one towel dry' → it serves as a control to compare against
Heating/cooling curve — 5 segments
- Segment 1 (sloped): solid heating — KE increases, temperature rises, q = mCΔT ($C_{ice}$ = 2.09 J/g·K)
- Segment 2 (flat at MP): melting — PE increases (bonds between particles weaken), T constant, q = m$H_f$
- Segment 3 (sloped): liquid heating — KE increases, T rises, q = mCΔT ($C_{water}$ = 4.18 J/g·K)
- Segment 4 (flat at BP): boiling — PE increases (particles escape), T constant, q = m$H_v$
- Segment 5 (sloped): gas heating — KE increases, T rises, q = mCΔT ($C_{steam}$ = 2.01 J/g·K)
- Cooling curve is the exact reverse — energy released, segments run backward
Intermolecular forces (IMFs)
- Hydrogen bonds (STRONGEST): only when H is directly bonded to N, O, or F (H-N, H-O, H-F)
- Examples: H₂O, NH₃, HF, alcohols, DNA base pairing
- Dipole-dipole: between polar molecules that lack H bonded to N/O/F
- London dispersion forces (LDF/van der Waals): present in ALL molecules; ONLY force in nonpolar; increases with molar mass and surface area (more electrons → stronger temporary dipoles)
- Strength: H-bond > dipole-dipole > LDF
Vapor pressure & boiling
- Vapor pressure: pressure exerted by vapor above a liquid in a closed system
- Higher temperature → higher vapor pressure (more molecules have enough energy to escape)
- Weaker IMFs → higher vapor pressure (easier to escape)
- Boiling point: temperature where vapor pressure = atmospheric pressure (Table H gives curves)
- Normal BP: temp where VP = 101.3 kPa (1 atm)
- At higher altitude (lower $P_{atm}$): water boils at LOWER temperature
q = mCΔT (sloped — T changing)
$q = mH_f$ (melting/freezing) | $q = mH_v$ (boiling/condensing)
Table B: $C_{water}$=4.18 J/g·K, $H_f$=334 J/g, $H_v$=2260 J/g
Heating curve: sloped = KE↑ (q=mCΔT); flat plateaus = phase change, PE↑, T constant (q=mH).
Unit 9: Gas Laws
▾Kinetic Molecular Theory (KMT)
- Gas particles in constant, random, straight-line motion
- Particle volume is negligible compared to container
- No attractive or repulsive forces between gas particles
- All collisions are perfectly elastic (no net energy lost)
- Average kinetic energy is directly proportional to Kelvin temperature (KE ∝ T)
Gas laws — ALWAYS convert to Kelvin!
- Boyle's Law: P₁V₁ = P₂V₂ (constant T and n) — inverse relationship (↑P → ↓V)
- Charles's Law: V₁/T₁ = V₂/T₂ (constant P and n) — direct relationship (↑T → ↑V)
- Gay-Lussac's Law: P₁/T₁ = P₂/T₂ (constant V and n) — direct relationship (↑T → ↑P)
- Combined Gas Law: P₁V₁/T₁ = P₂V₂/T₂ (covers all three above; covers any two changing)
- Avogadro's Law: equal volumes of gas at same T and P contain equal numbers of molecules
STP, molar volume, and ideal vs real
- STP (Standard Temperature and Pressure): 273 K (0°C) and 101.3 kPa (Table A)
- 1 mole of ANY ideal gas at STP = 22.4 L
- Most ideal conditions: HIGH temperature, LOW pressure (particles far apart, minimal attractions)
- Most ideal gases: small, nonpolar molecules (H₂, He, Ne) with very weak IMFs
- Real gases deviate most at: LOW temperature, HIGH pressure — particles close, attractions matter
Dalton's Law & Graham's Law
- Dalton's Law of Partial Pressures: $P_{total} = P₁ + P₂ + P₃ + ...$
- Each gas in a mixture exerts pressure independently
- Graham's Law (diffusion/effusion): lighter molecules move faster at same temperature
- Effusion rate ∝ 1/√(molar mass) — H₂ diffuses much faster than O₂
K = °C + 273
1 mol gas = 22.4 L at STP
$P_{total} = P₁ + P₂ + ...$
Unit 10: Solutions
▾Solution vocabulary
- Solute: what is dissolved (smaller quantity)
- Solvent: what does the dissolving (larger quantity) — water is the universal solvent
- Aqueous solution: solute dissolved in water
- Like dissolves like: polar/ionic solutes dissolve in polar solvents; nonpolar in nonpolar
- Solvation (hydration): water molecules surround and separate solute ions/molecules
- Electrolyte: substance that produces ions in solution → conducts electricity (NaCl, HCl, NaOH)
- Nonelectrolyte: does not ionize → does not conduct (sugar, ethanol, urea)
Factors affecting solubility
- Temperature ↑ for SOLIDS: solubility usually increases (more thermal energy to break solute-solute bonds)
- Temperature ↑ for GASES: solubility DECREASES (gas molecules have more energy to escape)
- Pressure ↑ for GASES only: solubility increases (Henry's Law: S = kP) — explains carbonated drinks
- Pressure has negligible effect on solid/liquid solubility
- Stirring: increases rate of dissolving ONLY — not the maximum amount
- Particle size (crushing): increases rate ONLY — more surface area exposed
Solubility curves (Table G)
- On the line: saturated — maximum solute dissolved at that temperature
- Below the line: unsaturated — more solute can still dissolve
- Above the line: supersaturated — UNSTABLE; extra solute will crystallize out
- Most solid solubility curves slope upward (higher T → more dissolves)
- Gas solubility curves slope downward (higher T → less dissolves)
- Reading Table G: find the temperature on the x-axis → read up to the curve → read left to get g solute per 100 g H₂O
- How much crystallizes: dissolve at high T (saturated) → cool to lower T → excess = (solubility at $T_{high}$) − (solubility at $T_{low}$)
Crystallization
- Occurs when a solution becomes supersaturated — more solute is dissolved than the solvent can hold at that temperature
- Trigger methods: (1) Cool a hot saturated solution — solubility drops, excess solute crystallizes out; (2) Evaporate solvent — solution becomes concentrated until supersaturated; (3) Add a seed crystal — gives particles a surface to nucleate on
- Seed crystal: a small crystal of the same substance added to a supersaturated solution to initiate crystallization
- Fractional crystallization: using temperature changes to selectively crystallize one substance out of a mixture of dissolved solids (exploits different solubility curves)
- Example (Table G): KNO₃ dissolves 110 g/100 g H₂O at 60°C. Cooled to 20°C, only 32 g dissolves → 78 g crystallizes out
- Example: NaCl solubility barely changes with temperature → not easily purified by crystallization; KNO₃ solubility changes greatly → ideal for recrystallization
- Crystallization vs. precipitation: crystallization is slow, produces well-formed crystals; precipitation is fast, produces amorphous solid
- Crystal lattice: ions arrange in a repeating 3D pattern as they come out of solution — minimizing potential energy
Concentration
- Molarity (M): M = moles of solute / liters of solution (mol/L)
- ppm: (mass solute / mass solution) × 10⁶ (used for very dilute solutions, e.g., water quality)
- Dilution: M₁V₁ = M₂V₂ (moles of solute stay constant when diluting)
Colligative properties
- Boiling point elevation: adding solute raises the boiling point ($ΔBP = K_b × m × i$)
- Freezing point depression: adding solute lowers the freezing point — roads, antifreeze
- Vapor pressure lowering: solute lowers VP of solvent
- Osmotic pressure: water moves from low to high solute concentration through semipermeable membrane
- Ionic solutes have greater effect: 1 mol NaCl → 2 mol ions; 1 mol CaCl₂ → 3 mol ions
ppm = (mass solute / mass solution) × 10⁶
M₁V₁ = M₂V₂ (dilution)
g crystallized = solubility(T₁) − solubility(T₂), per 100 g H₂O
Solubility curve zones. On the line = saturated; below = unsaturated; above = supersaturated (unstable).
Unit 11: Thermochemistry
▾Endothermic vs exothermic
- Endothermic: absorbs energy from surroundings; ΔH = positive (+); heat is a REACTANT; surroundings feel cold; products at HIGHER PE than reactants
- Exothermic: releases energy to surroundings; ΔH = negative (−); heat is a PRODUCT; surroundings feel warm; products at LOWER PE
- Real-world endothermic: cold packs, photosynthesis, evaporation, melting ice, dissolving NH₄NO₃
- Real-world exothermic: combustion, hand warmers, neutralization, respiration, dissolving NaOH, nuclear fission
Potential energy diagrams
- Activation energy (Ea forward): peak height ABOVE reactants = minimum energy to start reaction
- Activation energy (Ea reverse): peak height ABOVE products = energy to reverse the reaction
- $ΔH = H_{products} − H_{reactants}$ (can be + or −)
- Exothermic diagram: products LOWER than reactants; ΔH negative
- Endothermic diagram: products HIGHER than reactants; ΔH positive
- Catalyst: lowers Ea for BOTH directions, does NOT change ΔH or reactant/product energy levels
- Activated complex (transition state): at the peak; highly unstable, cannot be isolated
Bond energy & ΔH
- ΔH = energy of bonds BROKEN − energy of bonds FORMED
- If broken > formed → ΔH positive → endothermic
- If formed > broken → ΔH negative → exothermic
- Bond energy values come from Table I
Table I — Heats of reaction & dissolving
- Negative ΔH in Table I = exothermic process (releases heat — surroundings warm up)
- Positive ΔH in Table I = endothermic process (absorbs heat — surroundings cool down)
- Dissolving NaOH(s): ΔH is negative → exothermic — the solution gets WARM
- Dissolving NH₄NO₃(s): ΔH is positive → endothermic — the solution gets COLD (used in cold packs)
- Dissolving KNO₃(s): ΔH is positive → endothermic
- Dissolving NH₄Cl(s): ΔH is positive → endothermic
- Key: if the question asks which dissolving process is exothermic → find the one with NEGATIVE ΔH in Table I
Entropy (S)
- Entropy increases: solid→liquid→gas, dissolving, more moles of gas produced, higher temperature
- Entropy decreases: gas→liquid→solid, crystallization, fewer moles of gas, lower temperature
- Spontaneous reactions tend toward lower energy AND higher entropy
- ΔG = ΔH − TΔS (Gibbs free energy) — spontaneous when ΔG < 0
ΔH = bonds broken − bonds formed
Ea(forward) = peak − reactants | Ea(reverse) = peak − products
PE diagram: Ea = peak−reactants; ΔH = products−reactants. Dashed = catalyzed pathway (lower Ea, same ΔH).
Unit 12: Equilibrium & Kinetics
▾Collision theory
- 1. Particles must collide with each other
- 2. Collisions must have proper geometric orientation
- 3. Collisions must have energy ≥ activation energy (Ea)
- Effective collision: meets all three conditions → products form
- Ineffective collision: wrong orientation OR insufficient energy → no reaction
Factors affecting reaction rate
- Temperature ↑: particles move faster → more frequent AND higher-energy collisions
- Concentration ↑ (or pressure ↑ for gases): more particles per volume → more frequent collisions
- Surface area ↑ (grinding/crushing): more exposed particles for collisions
- Catalyst: provides alternate lower-Ea pathway → more collisions succeed (does NOT change ΔH)
- Nature of reactants: ionic reactions in solution are faster than molecular reactions
Physical vs chemical equilibrium
- Physical equilibrium: balance between opposing physical processes — no chemical reaction occurring
- Example: sealed flask with liquid water → evaporation rate = condensation rate → liquid-vapor equilibrium
- Evidence of physical equilibrium: liquid level stays constant in a sealed container; no net change observed
- Chemical equilibrium: balance between forward and reverse chemical reactions at equal rates
- Both types: occur in CLOSED systems, appear static but are dynamic, concentrations/amounts stay constant
Reading concentration vs. time graphs
- Before equilibrium: concentrations changing (reactants decreasing, products increasing, or vice versa)
- At equilibrium: ALL concentration lines become horizontal (flat) — no further net change
- The time at which lines flatten = the time equilibrium is reached
- After equilibrium: concentrations remain constant (flat lines) unless a stress is applied
- Key: look for where the curves level off and stay flat — that is when equilibrium is established
Chemical equilibrium
- Forward rate = reverse rate at equilibrium
- Concentrations remain CONSTANT (not necessarily equal to each other)
- Requires a CLOSED system (nothing enters or leaves)
- Equilibrium does NOT mean the reaction stopped — both directions still occurring
- Keq = [products]^coefficients / [reactants]^coefficients (pure solids/liquids excluded)
Le Chatelier's Principle
- Add reactant → shifts RIGHT (toward products)
- Remove reactant → shifts LEFT (toward reactants)
- Add product → shifts LEFT | Remove product → shifts RIGHT
- Exothermic + add heat → heat is a product → shifts LEFT
- Endothermic + add heat → heat is a reactant → shifts RIGHT
- ↑ Pressure (gas) → shifts toward side with FEWER moles of gas
- ↓ Pressure → shifts toward MORE moles of gas
- Catalyst → does NOT shift equilibrium, only reaches it FASTER
- Inert gas added at constant volume → NO shift (doesn't affect partial pressures of reactants/products)
Le Chatelier: treat heat as substance; exo: product; endo: reactant
Le Chatelier stresses: adding reactant → shift right; adding product → shift left; ↑T for exo → shift left; ↑P → shift toward fewer gas moles.
Unit 13: Acids, Bases & Salts
▾Acid-base theories
- Arrhenius acid: releases H⁺ (H₃O⁺) in aqueous solution (HCl, HNO₃, H₂SO₄, HF)
- Arrhenius base: releases OH⁻ in aqueous solution (NaOH, KOH, Ca(OH)₂)
- Brønsted-Lowry acid: proton (H⁺) DONOR
- Brønsted-Lowry base: proton (H⁺) ACCEPTOR
- Conjugate acid-base pair: differ by one H⁺ (HCl / Cl⁻; NH₄⁺ / NH₃; H₂O / OH⁻)
- Amphoteric substances: can act as BOTH acid and base — water (H₂O), bicarbonate (HCO₃⁻)
Properties & identification
- Acids: sour taste; turn blue litmus RED; pH < 7; react with metals → H₂ gas; react with bases
- Bases: bitter taste, slippery feel; turn red litmus BLUE; pH > 7; react with acids
- Strong acids (100% ionized in water): HCl, HBr, HI, HNO₃, H₂SO₄, HClO₄ (memorize these 6)
- Strong bases: NaOH, KOH, Ca(OH)₂, Ba(OH)₂, LiOH
- Weak acids/bases: partially ionize — reach equilibrium (HF, CH₃COOH/acetic acid, NH₃)
- Strength = % ionization; concentration = mol/L (a dilute strong acid is still 100% ionized)
pH scale & calculations
- pH = −log[H⁺] → [H⁺] = $10^{-pH}$
- pOH = −log[OH⁻] → [OH⁻] = $10^{-pOH}$
- pH + pOH = 14 (at 25°C)
- Kw = [H⁺][OH⁻] = 1×10⁻¹⁴ (at 25°C)
- pH < 7 = acidic; pH = 7 = neutral; pH > 7 = basic
- How much more acidic: pH 3 vs pH 5 → difference of 2 → 10² = 100× more acidic
Neutralization & titration
- Equivalence point: moles H⁺ = moles OH⁻ (complete neutralization)
- Indicator selection: choose an indicator whose range brackets the equivalence point pH
- Titration formula (1:1 molar ratio): $M_A × V_A = M_B × V_B$
- Salt formed = cation from base + anion from acid
- Example: HCl + NaOH → NaCl + H₂O
- Indicators from Table M: phenolphthalein (colorless→pink at pH 8.2–10); litmus (red→blue at 4.5–8.3)
pH + pOH = 14
[H⁺][OH⁻] = 1×10⁻¹⁴
$M_A × V_A = M_B × V_B$ (1:1 ratio)
ppm = (mass solute/mass solution) × 10⁶
Unit 14: Redox & Electrochemistry
▾Oxidation & reduction
- Oxidation: loss of electrons → oxidation number INCREASES → species becomes more positive
- Reduction: gain of electrons → oxidation number DECREASES → species becomes more negative
- Oxidizing agent: accepts electrons (gets REDUCED itself) — causes oxidation of the other
- Reducing agent: donates electrons (gets OXIDIZED itself) — causes reduction of the other
- LEO the lion says GER: Loses Electrons Oxidation | Gains Electrons Reduction
Oxidation number rules
- Rule 1: Free elements = 0 (Na, O₂, Fe, Cl₂)
- Rule 2: Monatomic ions = ion charge (Na⁺ = +1, O²⁻ = −2)
- Rule 3: Group 1 in compounds = +1 always
- Rule 4: Group 2 in compounds = +2 always
- Rule 5: F in compounds = −1 always (most electronegative)
- Rule 6: H = +1 usually; −1 in metal hydrides (NaH, CaH₂)
- Rule 7: O = −2 usually; −1 in peroxides (H₂O₂, Na₂O₂)
- Rule 8: Sum of oxidation numbers = 0 for neutral compound; = ion charge for polyatomic ion
Half-reactions & balancing
- Write the two half-reactions separately
- Balance atoms (add H⁺ or H₂O if needed for acidic; OH⁻ and H₂O for basic)
- Balance charge by adding electrons (e⁻)
- Multiply each half-reaction so e⁻ lost = e⁻ gained (LCM of electrons)
- Add the two half-reactions; cancel spectators and electrons that appear on both sides
Electrochemical cells
- Voltaic (galvanic) cell: SPONTANEOUS redox reaction → converts chemical energy to electrical energy (batteries)
- Anode = oxidation (both start with vowels) — in voltaic cell: NEGATIVE terminal
- Cathode = reduction (both start with consonants... remember RED-CAT) — in voltaic cell: POSITIVE terminal
- Electrons flow: anode → external wire → cathode
- Salt bridge: allows ion flow to maintain electrical neutrality of each half-cell
- Electrolytic cell: NONSPONTANEOUS reaction driven by external power source — electroplating, electrolysis of water
- In electrolytic cell: anode = POSITIVE terminal, cathode = NEGATIVE (signs FLIP from voltaic)
- Oxidation is ALWAYS at the anode; reduction ALWAYS at the cathode (regardless of cell type)
Table J activity series: higher = more active = more easily oxidized
Voltaic cell: anode (−) = oxidation; cathode (+) = reduction. Electrons flow anode→cathode via wire; ions flow through salt bridge.
Unit 15: Nuclear Chemistry
▾Types of radiation
- Alpha (α, ⁴₂He): helium nucleus; charge +2; mass 4 amu; LOW penetrating power (stopped by paper/skin); mass −4, atomic # −2
- Beta (β⁻, ⁰₋₁e): high-speed electron; charge −1; mass ≈0; moderate penetrating power (stopped by aluminum); mass unchanged, atomic # +1
- Gamma (γ, ⁰₀γ): high-energy photon; no charge, no mass; HIGHEST penetrating power (needs lead/concrete); no change to mass or atomic #
- Positron (β⁺, ⁰₊₁e): antimatter electron; charge +1; mass ≈0; mass unchanged, atomic # −1
- Neutron emission: ¹₀n released; mass −1, atomic # unchanged (rare but possible)
Nuclear equations & conservation
- Mass number conservation: sum of superscripts (top) equal on both sides
- Atomic number conservation: sum of subscripts (bottom) equal on both sides
- Strategy: find the missing particle by subtraction
- Example: ²³⁸₉₂U → ⁴₂He + ²³⁴₉₀Th (alpha decay: mass 238−4=234; atomic# 92−2=90)
- Example: ¹⁴₆C → ⁰₋₁e + ¹⁴₇N (beta decay: mass 14−0=14; atomic# 6+1=7)
- Transmutation: one element changing into another through nuclear decay or bombardment
Half-life calculations
- Amount remaining = original × (½)^(t/t₁/₂) = original × (½)^(number of half-lives)
- Number of half-lives = total time ÷ t₁/₂
- Each half-life: 100%→50%→25%→12.5%→6.25%→3.125%
- Table N lists radioisotopes, their half-lives, decay modes, and uses
- Half-life is NOT affected by temperature, pressure, or the chemical form of the element
Fission, fusion & applications
- Fission: splitting a HEAVY nucleus into smaller ones + neutrons + energy (U-235, Pu-239 in reactors)
- Chain reaction: neutrons from one fission trigger more fissions — controlled in reactors, uncontrolled in bombs
- Fusion: combining LIGHT nuclei into heavier one + energy (H + H → He in the sun); requires extreme T and P
- Fusion releases MORE energy per gram than fission
- Nuclear energy comes from mass-energy conversion: E = mc² (small mass loss = huge energy)
- Medical uses (Table N): I-131 (thyroid treatment/imaging), Tc-99m (diagnostic imaging), Co-60 (cancer radiation)
- C-14 (t₁/₂ = 5715 yr): carbon dating of organic material; U-238 (t₁/₂ = 4.5×10⁹ yr): geological dating
Alpha: mass −4, atomic# −2 | Beta: mass 0, atomic# +1 | Gamma: no change | Positron: mass 0, atomic# −1
Radioactive decay types: alpha loses ⁴₂He (mass−4, Z−2); beta emits e⁻ (Z+1); gamma emits photon (no change); penetrating power: γ > β > α.
Unit 16: Organic Chemistry
▾What makes a compound organic
- All organic compounds contain carbon (and usually hydrogen)
- Carbon always forms 4 covalent bonds — never more, never less
- The backbone of organic molecules is a chain or ring of carbon-carbon bonds
- Organic chemistry is the chemistry of carbon-containing compounds
- Exceptions that are NOT considered organic: CO, CO₂, carbonates (CO₃²⁻), cyanides (CN⁻)
Homologous series & naming prefixes (Table Q)
- Prefix meth- = 1 carbon | eth- = 2 | prop- = 3 | but- = 4 | pent- = 5 | hex- = 6 | hept- = 7 | oct- = 8
- Alkanes (CₙH₂ₙ₊₂): single bonds only; -ane suffix (methane, ethane, propane...)
- Alkenes (CₙH₂ₙ): one double bond; -ene suffix (ethene, propene, butene...)
- Alkynes (CₙH₂ₙ₋₂): one triple bond; -yne suffix (ethyne = acetylene)
- Cycloalkanes (CₙH₂ₙ): carbon ring with all single bonds
- Each successive member differs by one CH₂ unit (14 g/mol higher molar mass)
Functional groups (Table P)
- Alcohol (−OH): R−OH; suffix -ol; e.g., ethanol (CH₃CH₂OH). Formed by: fermentation, substitution of halogen.
- Aldehyde (−CHO): R−CHO; suffix -al; e.g., methanal (formaldehyde). Contains C=O at end of chain.
- Ketone (C=O in chain): R−CO−R; suffix -one; e.g., propanone (acetone).
- Carboxylic acid (−COOH): R−COOH; suffix -oic acid; e.g., methanoic acid (formic), ethanoic acid (acetic).
- Ester (−COO−): R−COO−R'; suffix -anoate; e.g., ethyl ethanoate. Formed from acid + alcohol.
- Ether (−O−): R−O−R'; e.g., diethyl ether.
- Amine (−NH₂): R−NH₂; e.g., methylamine. Weak bases.
- Amide (−CONH₂): R−CONH₂; found in proteins and nylon.
- Halide: one or more H replaced by halogen (F, Cl, Br, I)
Organic reactions (Table R)
- Fermentation: C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂ (glucose → ethanol + CO₂; yeast catalyst; no O₂ — anaerobic)
- Esterification: carboxylic acid + alcohol → ester + water (R−COOH + HO−R' → R−COO−R' + H₂O)
- Saponification: ester + base (NaOH) → soap (salt of fatty acid) + alcohol
- Substitution: one atom replaces another; e.g., alkane + Cl₂ → chloroalkane + HCl
- Addition: atoms added across a double or triple bond; alkene + H₂ → alkane (hydrogenation)
- Combustion: CₓHᵧ + O₂ → CO₂ + H₂O + energy
- Polymerization: many monomers join → polymer; e.g., ethene → polyethylene; nylon, proteins, DNA
Isomers
- Same: molecular formula (same # of each atom), molar mass
- Different: structural formula (arrangement), physical properties (BP, MP), sometimes chemical properties
- Example: C₄H₁₀ → butane (straight chain) and 2-methylpropane (branched) are isomers
- Example: propanoic acid (CH₃CH₂COOH) and ethyl methanoate (HCOOCH₂CH₃) are isomers — both C₃H₆O₂
- To identify: count atoms in each formula; if totals match, they are isomers
Organic naming rules
- Step 1: Find the longest continuous C chain → gives base name (hex = 6 carbons)
- Step 2: Number from end closest to branches/substituents (gives them lowest numbers)
- Step 3: Name substituents with number: 2-methyl (CH₃ on C2), 3-ethyl, etc.
- Multiple substituents: alphabetical order (ethyl before methyl); di/tri if same substituent twice
- Example: 3-methylhexane = 6-carbon chain with a CH₃ branch on carbon 3
- Example: 2,3-dimethylpentane = 5-carbon chain with CH₃ on C2 and C3
Fermentation: C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂
Esterification: acid + alcohol → ester + H₂O
Browse all 153 flashcards as a list
Unit 1: Matter & Change
- Element
- Pure substance made of only ONE type of atom; cannot be broken down chemically (e.g., Fe, O₂, Cu, Ne)
- Compound
- Pure substance made of two or more elements CHEMICALLY combined in a fixed ratio; separated only by chemical means (e.g., H₂O, NaCl)
- Homogeneous mixture
- Uniform throughout; looks like one phase (e.g., salt water, air, brass, vinegar). Also called a solution.
- Heterogeneous mixture
- Non-uniform; visible different parts that can be physically separated (e.g., sand+water, salad, granite)
- Physical change
- Change in form, shape, or phase without changing chemical composition (melting, dissolving, cutting). Original substance can be recovered.
- Chemical change
- A new substance with new properties is formed. Signs: color change, gas, precipitate, irreversible temperature change, light/sound.
- Intensive property
- Property that does NOT depend on sample size: density, temperature, melting point, color, boiling point
- Extensive property
- Property that DOES depend on sample size: mass, volume, length, total heat
- Distillation
- Separation technique for two liquids with different boiling points — one evaporates first, then condenses separately
- Chromatography
- Separation technique based on polarity differences — separates dissolved substances (e.g., ink pigments)
Unit 2: Measurements & Math
- Significant figures
- The digits in a measurement that are known with certainty plus one estimated digit. Indicate precision of a measurement.
- Accuracy
- How close a measurement is to the TRUE/accepted value. Measured by percent error.
- Precision
- How close REPEATED measurements are to each other. Consistency of results, regardless of accuracy.
- Percent error
- |measured − accepted| / accepted × 100. Always positive. Measures accuracy.
- Mole (mol)
- SI unit = 6.02×10²³ particles (Avogadro's number). Like a 'dozen' but for atoms/molecules.
- Gram formula mass (GFM)
- The molar mass of a substance — sum of all atomic masses in the formula, in g/mol
- Avogadro's number
- 6.02×10²³ — the number of particles in one mole of any substance
- Dimensional analysis
- Method of converting units by multiplying by conversion factors (fractions = 1) so unwanted units cancel
Unit 3: Atomic Concepts
- Atomic number
- Number of PROTONS in the nucleus. Defines the element's identity. Equal to number of electrons in a neutral atom.
- Mass number
- Number of PROTONS + NEUTRONS in the nucleus. Varies between isotopes of the same element.
- Isotopes
- Atoms of the same element (same protons) with DIFFERENT numbers of neutrons → different mass numbers
- Ground state
- Lowest energy electron configuration — electrons in the lowest available orbitals
- Excited state
- Electron absorbed energy and jumped to a higher energy level. Total electron count unchanged; config ≠ lowest.
- Bright-line spectrum
- Unique pattern of discrete wavelengths of light emitted when excited electrons fall to lower energy levels — fingerprint of each element
- Rutherford gold foil experiment
- Most alpha particles passed through gold foil; few were deflected back → proved atoms have a small, dense, positive nucleus with mostly empty space
- Wave-mechanical model
- Current atomic model — electrons exist in probability clouds (orbitals), not fixed paths. Explains all elements.
- Valence electrons
- Electrons in the outermost energy level (highest principal quantum number). Determine chemical reactivity.
- Orbital
- Region of space where an electron is most likely to be found. Each orbital holds max 2 electrons (opposite spins).
Unit 4: Periodic Table
- Electronegativity
- Tendency of an atom to attract shared electrons toward itself. Highest = F (4.0). Increases across period, decreases down group.
- Ionization energy
- Energy required to remove ONE electron from a gaseous atom. Increases across period, decreases down group.
- Atomic radius
- Size of an atom. DECREASES across a period (more protons, same shell); INCREASES down a group (more shells).
- Metallic character
- Tendency to lose electrons and form cations. Increases down and to the left on the periodic table. Opposite of electronegativity.
- Isoelectronic
- Atoms or ions with the same number of electrons and same electron configuration (e.g., Na⁺, Mg²⁺, and Ne all have 10 e⁻)
- Cation
- Positively charged ion formed when an atom LOSES electrons. Smaller than parent atom (same protons, fewer electrons).
- Anion
- Negatively charged ion formed when an atom GAINS electrons. Larger than parent atom (same protons, more electrons).
- Noble gas
- Group 18 elements with full valence shells (8 e⁻, or 2 for He). Chemically inert/nonreactive. Used as reference configs for ions.
Unit 5: Chemical Bonding
- Ionic bond
- Electrostatic attraction between oppositely charged ions. Forms between metals and nonmetals (ΔEN ≥ 1.7). Electron TRANSFER.
- Covalent bond
- Sharing of electron pairs between nonmetal atoms. Polar if ΔEN 0.4–1.7; nonpolar if ΔEN < 0.4.
- Metallic bond
- Attraction between positive metal ion cores and a 'sea' of delocalized valence electrons. Explains conductivity, malleability, luster.
- Polar molecule
- Molecule with unequal charge distribution (net dipole) due to polar bonds AND asymmetric geometry (e.g., H₂O, NH₃, HCl)
- Nonpolar molecule
- Molecule with equal charge distribution — either nonpolar bonds (Cl₂) or symmetric cancellation of polar bonds (CO₂, CH₄, CCl₄)
- Lewis dot structure
- Diagram showing valence electrons as dots; bonding pairs between atoms, lone pairs on individual atoms. Satisfies octet rule.
- VSEPR theory
- Valence Shell Electron Pair Repulsion — electron groups repel, so molecules adopt shapes that minimize repulsion
- Hydrogen bond
- Extra-strong dipole-dipole force between H bonded to N, O, or F and another electronegative atom. Explains water's high boiling point.
- London dispersion forces
- Weakest IMF — temporary dipoles in all molecules; increases with molar mass and surface area. ONLY force in nonpolar molecules.
- Octet rule
- Atoms tend to gain, lose, or share electrons to achieve 8 valence electrons (exceptions: H=2, B=6, expanded for period 3+ elements)
Unit 6: Chemical Quantities
- Stoichiometry
- Using balanced equation coefficients (mole ratios) to calculate amounts of reactants or products in a chemical reaction
- Empirical formula
- Simplest whole-number ratio of atoms in a compound. May differ from molecular formula (CH₂ vs C₄H₈).
- Molecular formula
- Actual number of atoms of each element in one molecule of a compound (e.g., C₄H₈, H₂O₂, C₆H₁₂O₆)
- Percent composition
- Mass percentage of each element in a compound. (mass of element in 1 mol / molar mass) × 100
- Limiting reagent
- Reactant that is completely consumed first, determining the maximum amount of product that can form
- Theoretical yield
- Maximum amount of product that could form based on stoichiometry from the limiting reagent
- Percent yield
- (actual yield / theoretical yield) × 100. Measures reaction efficiency. Cannot exceed 100%.
- Hydrate
- Ionic compound with water molecules trapped in the crystal structure (e.g., CuSO₄·5H₂O). Water is released on heating.
- Excess reagent
- The reactant that is NOT fully consumed — some remains after the limiting reagent is used up.
- Stoichiometry 4-step roadmap
- 1) g given ÷ GFM → mol given. 2) × mole ratio (coeff wanted / coeff given). 3) × GFM wanted → g wanted. Moles are always the bridge.
- Volume–volume stoichiometry (STP)
- At STP, gas volumes react in the same ratio as their coefficients: 2 L H₂ + 1 L O₂ → 2 L H₂O (Gay-Lussac's Law of Combining Volumes).
Unit 7: Chemical Reactions
- Synthesis reaction
- Two or more reactants combine to form a single product: A + B → AB (e.g., 2Na + Cl₂ → 2NaCl)
- Decomposition reaction
- Single compound breaks into simpler substances: AB → A + B (e.g., 2H₂O → 2H₂ + O₂)
- Single replacement reaction
- One element displaces another from a compound: A + BC → AC + B. Spontaneous only if A is higher than B on Table J.
- Double replacement reaction
- Ions from two compounds switch partners: AB + CD → AD + CB. Occurs if a precipitate, gas, or water forms.
- Combustion reaction
- Hydrocarbon + O₂ → CO₂ + H₂O (complete). Produces CO or C soot in incomplete combustion.
- Precipitate
- Insoluble solid that forms and settles out when two aqueous solutions are mixed. Predicted using Table F.
- Activity series (Table J)
- Ranking of metals/halogens by reactivity. A higher element will spontaneously replace a lower one in a compound.
- Spectator ions
- Ions present in solution that do not participate in the reaction — they appear unchanged on both sides of the equation
Unit 8: Phases of Matter
- Kinetic energy (KE)
- Energy of motion. KE = ½mv². Temperature is a measure of average KE of particles.
- Potential energy (PE)
- Stored energy based on position or arrangement. Changes during phase transitions (not during temperature changes within a phase).
- Phase change
- Change in state of matter (solid↔liquid↔gas). Temperature stays CONSTANT during a phase change; PE changes.
- Heat of fusion (Hf)
- Energy required to melt (or released on freezing) 1 gram of a substance at its melting point. q = mHf. For water: 334 J/g.
- Heat of vaporization (Hv)
- Energy required to vaporize (or released on condensing) 1 gram of a substance at its boiling point. q = mHv. For water: 2260 J/g.
- Specific heat capacity (C)
- Energy needed to raise 1 gram of a substance by 1°C (or 1 K). q = mCΔT. For water: 4.18 J/g·K.
- Vapor pressure
- Pressure exerted by vapor above a liquid in a closed system. Increases with temperature. Lower vapor pressure = stronger IMFs.
- Intermolecular forces (IMFs)
- Attractive forces BETWEEN molecules (not within). Determine boiling point, melting point, vapor pressure. H-bond > dipole > LDF.
Unit 9: Gas Laws
- Boyle's Law
- P₁V₁ = P₂V₂ (constant T, n). Pressure and volume are INVERSELY proportional. Double pressure → half volume.
- Charles's Law
- V₁/T₁ = V₂/T₂ (constant P, n). Volume and temperature (Kelvin) are DIRECTLY proportional.
- Gay-Lussac's Law
- P₁/T₁ = P₂/T₂ (constant V, n). Pressure and temperature (Kelvin) are directly proportional.
- Combined Gas Law
- P₁V₁/T₁ = P₂V₂/T₂. Combines Boyle's, Charles's, and Gay-Lussac's laws. Always use Kelvin.
- STP
- Standard Temperature and Pressure: 273 K (0°C) and 101.3 kPa (1 atm). At STP, 1 mol of ideal gas = 22.4 L.
- Ideal gas
- Hypothetical gas that perfectly follows KMT — no volume, no intermolecular forces. Best modeled by H₂ and He at high T, low P.
- Absolute zero
- 0 Kelvin (−273°C) — theoretical point where all particle motion stops and KE = 0. Cannot actually reach it.
- KMT (Kinetic Molecular Theory)
- Model describing ideal gas behavior: random straight-line motion, no forces between particles, elastic collisions, KE ∝ T(Kelvin)
Unit 10: Solutions
- Solubility
- Maximum amount of solute that can dissolve in a given amount of solvent at a specific temperature. Shown on Table G curves.
- Saturated solution
- Contains maximum dissolved solute at that temperature — ON the solubility curve line
- Unsaturated solution
- Contains LESS solute than maximum — BELOW the solubility curve. More can still dissolve.
- Supersaturated solution
- Contains MORE solute than normally possible — ABOVE the curve. Unstable; crystallizes if disturbed.
- Molarity (M)
- M = moles of solute / liters of solution. Unit: mol/L. The most common concentration unit.
- Electrolyte
- Substance that ionizes/dissociates in solution and conducts electricity (strong: HCl, NaOH, NaCl; weak: acetic acid)
- Colligative property
- Property that depends on the NUMBER of dissolved particles, not their type. Examples: BP elevation, FP depression, vapor pressure lowering.
- Henry's Law
- Solubility of a gas increases with increasing pressure. Explains carbonation of beverages.
- Crystallization
- Process where dissolved solute comes out of solution and forms solid crystals. A physical change. Triggered by cooling, evaporation, or adding a seed crystal.
- Seed crystal
- A small crystal of the same substance added to a supersaturated solution to initiate crystallization by providing a nucleation surface.
- Fractional crystallization
- Separation technique that exploits differences in solubility curves — cooling a mixture crystallizes the substance whose solubility drops most, leaving others dissolved.
- Amount crystallized
- = solubility at $T_{high}$ − solubility at $T_{low}$ (per 100 g H₂O). Only possible if starting solution was saturated at $T_{high}$.
Unit 11: Thermochemistry
- Endothermic reaction
- Absorbs energy from surroundings. ΔH = positive (+). Heat is a REACTANT. Surroundings feel cold. Products at higher PE.
- Exothermic reaction
- Releases energy to surroundings. ΔH = negative (−). Heat is a PRODUCT. Surroundings feel warm. Products at lower PE.
- Activation energy (Ea)
- Minimum energy required for a reaction to occur. Height from reactants to peak on a PE diagram. Catalyst lowers Ea.
- Activated complex
- Unstable intermediate at the peak of the PE diagram. Transition state — can either form products or revert to reactants.
- Catalyst
- Substance that lowers Ea (both forward and reverse directions) without being consumed. Does NOT change ΔH or equilibrium position.
- Entropy (S)
- Measure of disorder/randomness in a system. Increases: solid→liquid→gas, dissolving, more moles of gas, higher temperature.
- ΔH
- Enthalpy change $= H_{products} − H_{reactants}$. Negative = exothermic (energy released); Positive = endothermic (energy absorbed).
- Bond energy
- Energy required to BREAK one mole of a specific bond in the gas phase. Breaking bonds = endothermic; forming bonds = exothermic.
Unit 12: Equilibrium & Kinetics
- Chemical equilibrium
- State where forward rate = reverse rate; concentrations remain constant; occurs in a closed system. Dynamic, not static.
- Le Chatelier's Principle
- When a stress is applied to a system at equilibrium, the system shifts to COUNTERACT (relieve) that stress.
- Collision theory
- For a reaction to occur: particles must collide, with proper orientation, AND with energy ≥ Ea. All three required.
- Equilibrium constant (Keq)
- Ratio of product concentrations to reactant concentrations (each raised to their coefficients) at equilibrium. Pure solids/liquids excluded.
- Effective collision
- Collision that results in a chemical reaction — has correct orientation AND energy ≥ activation energy
- Reaction rate
- Speed at which reactants are converted to products. Affected by: temperature, concentration, surface area, catalysts, nature of reactants.
Unit 13: Acids, Bases & Salts
- Arrhenius acid
- Substance that produces H⁺ (H₃O⁺) in aqueous solution (HCl, H₂SO₄, HNO₃)
- Arrhenius base
- Substance that produces OH⁻ in aqueous solution (NaOH, KOH, Ca(OH)₂)
- Brønsted-Lowry acid
- Proton (H⁺) DONOR in a reaction. Broader definition than Arrhenius — works in non-aqueous systems too.
- Brønsted-Lowry base
- Proton (H⁺) ACCEPTOR in a reaction.
- pH
- pH = −log[H⁺]. Scale 0–14. Acidic < 7; Neutral = 7; Basic > 7. Logarithmic: each unit = 10× change in [H⁺].
- Strong acid
- Completely dissociates (100%) in water: HCl, HBr, HI, HNO₃, H₂SO₄, HClO₄. Produces maximum H⁺.
- Weak acid
- Partially dissociates (<100%) in water, reaching equilibrium. Examples: HF, CH₃COOH (acetic acid), H₂CO₃.
- Neutralization
- Reaction between an acid and a base to produce a salt and water: HCl + NaOH → NaCl + H₂O
- Titration
- Lab technique to find unknown concentration using $M_A×V_A = M_B×V_B$ (1:1). Equivalence point: moles H⁺ = moles OH⁻.
- Conjugate acid-base pair
- Two species that differ by ONE proton (H⁺). Example: HCl and Cl⁻; NH₄⁺ and NH₃.
Unit 14: Redox & Electrochemistry
- Oxidation
- Loss of electrons. Oxidation number INCREASES. Occurs at the ANODE. OIL (Oxidation Is Loss).
- Reduction
- Gain of electrons. Oxidation number DECREASES. Occurs at the CATHODE. RIG (Reduction Is Gain).
- Oxidizing agent
- Species that ACCEPTS electrons (gets reduced). Causes oxidation of the other substance.
- Reducing agent
- Species that DONATES electrons (gets oxidized). Causes reduction of the other substance.
- Half-reaction
- Shows either the oxidation or reduction half of a redox reaction separately, with electrons explicitly shown
- Voltaic (galvanic) cell
- SPONTANEOUS redox reaction that generates electrical energy. Converts chemical → electrical energy. Anode = (−), cathode = (+).
- Electrolytic cell
- Uses EXTERNAL electrical energy to drive a NONSPONTANEOUS reaction (electroplating, water electrolysis). Anode = (+), cathode = (−).
- Salt bridge
- Connects two half-cells; allows ions to flow to maintain electrical neutrality. Ions flow; electrons flow through external wire.
- Anode
- Electrode where OXIDATION occurs in ANY electrochemical cell. In voltaic: negative (−). In electrolytic: positive (+).
- Cathode
- Electrode where REDUCTION occurs in ANY electrochemical cell (RED-CAT). In voltaic: positive (+). In electrolytic: negative (−).
Unit 15: Nuclear Chemistry
- Alpha decay (α)
- Emission of ⁴₂He nucleus. Mass number decreases by 4, atomic number decreases by 2. Stopped by paper.
- Beta decay (β⁻)
- Emission of high-speed electron (⁰₋₁e). Neutron → proton + electron. Mass unchanged, atomic number +1. Stopped by aluminum.
- Gamma radiation (γ)
- High-energy photon emission. NO change in mass number or atomic number. Most penetrating — needs lead/concrete to stop.
- Positron emission (β⁺)
- Emission of ⁰₊₁e (antielectron). Proton → neutron + positron. Mass unchanged, atomic number −1.
- Half-life (t₁/₂)
- Time for HALF of a radioactive sample to decay. Constant — independent of temperature, pressure, or chemical state.
- Nuclear fission
- Splitting of a HEAVY nucleus (U-235, Pu-239) into smaller nuclei + neutrons + large amounts of energy. Used in reactors.
- Nuclear fusion
- Combining LIGHT nuclei (H isotopes) into a heavier nucleus + enormous energy. Powers the sun and stars. Requires extreme conditions.
- Transmutation
- Conversion of one element to another through nuclear decay or particle bombardment. Changes atomic number.
- Carbon-14 dating
- Uses C-14 half-life (5715 yr) to date once-living organic material. Works because C-14 intake stops at death and decays at a known rate.
- Radioactive decay series
- Sequential decay of a heavy nucleus through multiple steps until a stable nucleus is reached (U-238 eventually → Pb-206)
Unit 16: Organic Chemistry
- Organic compound
- Any compound that contains carbon (usually with hydrogen). Exceptions: CO, CO₂, carbonates, cyanides are considered inorganic.
- Homologous series
- A family of organic compounds with the same general formula and functional group, each differing by one CH₂ unit. Members have gradually changing properties.
- Alkanes
- Saturated hydrocarbons — single bonds only. General formula CₙH₂ₙ₊₂. Suffix: -ane. Examples: methane (CH₄), ethane (C₂H₆), propane (C₃H₈).
- Alkenes
- Unsaturated hydrocarbons — one double bond. General formula CₙH₂ₙ. Suffix: -ene. Examples: ethene (C₂H₄), propene (C₃H₆).
- Alkynes
- Unsaturated hydrocarbons — one triple bond. General formula CₙH₂ₙ₋₂. Suffix: -yne. Example: ethyne (C₂H₂ = acetylene).
- Functional group
- An atom or group of atoms in an organic molecule that determines the compound's chemical properties. Examples: −OH (alcohol), −COOH (carboxylic acid), −COO− (ester).
- Alcohol (−OH)
- Organic functional group: −OH attached to a carbon. Suffix: -ol. Example: ethanol (C₂H₅OH). Produced by fermentation or addition of H₂O to alkene.
- Carboxylic acid (−COOH)
- Organic acid functional group. Suffix: -oic acid. Example: methanoic acid (HCOOH), ethanoic acid (CH₃COOH = acetic acid). Weak acids.
- Ester (−COO−)
- Formed from carboxylic acid + alcohol → ester + water (esterification). Suffix: -anoate. Often have pleasant fruity odors.
- Fermentation
- Reaction: C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂. Glucose → ethanol + carbon dioxide. Uses yeast, anaerobic (no oxygen). Produces alcoholic beverages.
- Esterification
- Carboxylic acid + alcohol → ester + water. Reversible reaction. The −OH from the acid and the H from the alcohol's −OH combine to form H₂O.
- Isomers
- Compounds with the SAME molecular formula but DIFFERENT structural formulas. Same atoms, connected differently → different properties. Example: butane and 2-methylpropane (both C₄H₁₀).
- Addition reaction
- Atoms are added across a double or triple bond. Converts unsaturated → saturated. Example: C₂H₄ + H₂ → C₂H₆ (hydrogenation of ethene to ethane).
- Substitution reaction
- One atom in an organic molecule is replaced by another. Example: CH₄ + Cl₂ → CH₃Cl + HCl. Common with alkanes and halogens.
- Polymerization
- Many small monomer units join together to form a large polymer chain. Example: ethene (C₂H₄) → polyethylene. Also: amino acids → proteins; nucleotides → DNA.
- Allotropes
- Different structural forms of the same element with different properties. Example: O₂ and O₃ (both oxygen); diamond and graphite (both carbon).
Worked Examples
Unit 1: Matter & Change
Unit 2: Measurements & Math
Unit 3: Atomic Concepts
Unit 4: Periodic Table
Unit 5: Chemical Bonding
Unit 6: Chemical Quantities
Unit 7: Chemical Reactions
Unit 8: Phases of Matter
Unit 9: Gas Laws
Unit 10: Solutions
Unit 11: Thermochemistry
Unit 12: Equilibrium & Kinetics
Unit 13: Acids, Bases & Salts
Unit 14: Redox & Electrochemistry
Unit 15: Nuclear Chemistry
Unit 16: Organic Chemistry
Games
Core Formulas (Table T)
Nuclear Particle Changes
| Decay Type | Symbol | Mass # Change | Atomic # Change | Penetration |
|---|---|---|---|---|
| Alpha (α) | ⁴₂He | −4 | −2 | Stopped by paper |
| Beta⁻ (β⁻) | ⁰₋₁e | 0 | +1 | Stopped by aluminum |
| Positron (β⁺) | ⁰₊₁e | 0 | −1 | Stopped by aluminum |
| Gamma (γ) | ⁰₀γ | 0 | 0 | Needs lead/concrete |
Indicator Table (Table M)
| Indicator | Transition pH | Acid Color | Base Color |
|---|---|---|---|
| Methyl orange | 3.1–4.4 | Red | Yellow |
| Bromcresol green | 3.8–5.4 | Yellow | Blue |
| Litmus | 4.5–8.3 | Red | Blue |
| Bromthymol blue | 6.0–7.6 | Yellow | Blue |
| Thymol blue | 8.0–9.6 | Yellow | Blue |
| Phenolphthalein | 8.2–10.0 | Colorless | Pink/Fuchsia |
Oxidation Number Rules (Priority Order)
- Free elements: any uncombined element = 0 (Na, O₂, Cl₂, Fe)
- Monatomic ions: oxidation # = ion charge (Na⁺=+1, Cl⁻=−1, Fe³⁺=+3)
- Group 1 in compounds: always +1 (Li, Na, K, Rb, Cs)
- Group 2 in compounds: always +2 (Mg, Ca, Ba, Sr)
- Fluorine: always −1 (most electronegative element)
- Hydrogen: +1 usually; −1 in metal hydrides (NaH, CaH₂, LiH)
- Oxygen: −2 usually; −1 in peroxides (H₂O₂, Na₂O₂); +2 with F only
- Sum rule: sum of all oxidation numbers = 0 (neutral) or = ion charge (polyatomic)
Half-Life Reference Table
| # Half-Lives | Fraction Left | % Remaining | % Decayed |
|---|---|---|---|
| 0 | 1 | 100% | 0% |
| 1 | 1/2 | 50% | 50% |
| 2 | 1/4 | 25% | 75% |
| 3 | 1/8 | 12.5% | 87.5% |
| 4 | 1/16 | 6.25% | 93.75% |
| 5 | 1/32 | 3.125% | 96.875% |
VSEPR Molecular Geometry
| Bonding Pairs | Lone Pairs | Geometry | Bond Angle | Example |
|---|---|---|---|---|
| 2 | 0 | Linear | 180° | CO₂, BeCl₂ |
| 3 | 0 | Trigonal planar | 120° | BF₃, SO₃ |
| 4 | 0 | Tetrahedral | 109.5° | CH₄, CCl₄ |
| 3 | 1 | Trigonal pyramidal | 107° | NH₃ |
| 2 | 2 | Bent/V-shaped | 104.5° | H₂O |
Electrochemistry Summary
| Property | Voltaic (Galvanic) Cell | Electrolytic Cell |
|---|---|---|
| Energy conversion | Chemical → Electrical | Electrical → Chemical |
| Spontaneous? | Yes | No (needs external power) |
| Anode sign | Negative (−) | Positive (+) |
| Cathode sign | Positive (+) | Negative (−) |
| At anode | Oxidation (always) | Oxidation (always) |
| At cathode | Reduction (always) | Reduction (always) |
| Electron flow | Anode → Cathode (wire) | Cathode ← Anode (wire) |
Strong Acids & Bases (Memorize)
Reference Table Guide (All Tables)
Electronegativity & Bond Type
| ΔEN Range | Bond Type | Example |
|---|---|---|
| 0 – 0.4 | Nonpolar covalent | Cl-Cl, C-H, H-H |
| 0.4 – 1.7 | Polar covalent | H-O, H-N, H-Cl |
| ≥ 1.7 | Ionic | Na-Cl, Mg-O, Ca-F |
Gas Laws Quick Reference
| Law | Formula | Constant | Relationship |
|---|---|---|---|
| Boyle's | P₁V₁ = P₂V₂ | T, n | P and V inverse |
| Charles's | V₁/T₁ = V₂/T₂ | P, n | V and T direct |
| Gay-Lussac's | P₁/T₁ = P₂/T₂ | V, n | P and T direct |
| Combined | P₁V₁/T₁ = P₂V₂/T₂ | n | All three |
| Avogadro's | Equal V at same T,P = equal n | T, P | V and n direct |
Organic Chemistry Quick Reference
| Series | General Formula | Bond Type | Example |
|---|---|---|---|
| Alkanes | CₙH₂ₙ₊₂ | Single only (saturated) | CH₄, C₂H₆, C₃H₈ |
| Alkenes | CₙH₂ₙ | One double bond | C₂H₄, C₃H₆ |
| Alkynes | CₙH₂ₙ₋₂ | One triple bond | C₂H₂ (acetylene) |
| Cycloalkanes | CₙH₂ₙ | Ring, single bonds | C₃H₆ (cyclopropane) |
| Functional Group | Name Class | Suffix | Example |
|---|---|---|---|
| −OH | Alcohol | -ol | ethanol (C₂H₅OH) |
| −COOH | Carboxylic acid | -oic acid | ethanoic acid (CH₃COOH) |
| −COO− | Ester | -anoate | ethyl ethanoate |
| −CHO | Aldehyde | -al | methanal (formaldehyde) |
| C=O (chain) | Ketone | -one | propanone (acetone) |
| −NH₂ | Amine | -amine | methylamine |
| Reaction (Table R) | Reactants | Products | Key fact |
|---|---|---|---|
| Fermentation | C₆H₁₂O₆ | 2C₂H₅OH + 2CO₂ | Yeast, anaerobic, makes alcohol |
| Esterification | Acid + Alcohol | Ester + H₂O | Reversible |
| Saponification | Ester + NaOH | Soap + Alcohol | Reverse of esterification |
| Addition | Alkene + H₂/Cl₂ | Saturated product | Breaks double bond |
| Substitution | Alkane + halogen | Haloalkane + HX | Replaces H with halogen |
| Combustion | CₓHᵧ + O₂ | CO₂ + H₂O | Complete combustion always |
| Polymerization | n(monomer) | Polymer | Ethene → polyethylene |
Crystallization & Stoichiometry Quick Reference
Periodic Trends Summary
| Property | Across Period (L→R) | Down Group (↓) | Largest Value |
|---|---|---|---|
| Atomic radius | Decreases | Increases | Fr (bottom-left) |
| Ionization energy | Increases | Decreases | He (top-right) |
| Electronegativity | Increases | Decreases | F (4.0) |
| Metallic character | Decreases | Increases | Fr (bottom-left) |
| Ionic radius (cations) | Decreases | Increases | Cs⁺ |
Table I — Heats of Dissolving
| Compound | ΔH (dissolving) | Type | Effect on solution |
|---|---|---|---|
| NaOH(s) | Negative (−) | Exothermic | Solution gets WARM |
| NH₄NO₃(s) | Positive (+) | Endothermic | Solution gets COLD (cold packs) |
| KNO₃(s) | Positive (+) | Endothermic | Solution gets COLD |
| NH₄Cl(s) | Positive (+) | Endothermic | Solution gets COLD |
Physical vs Chemical Equilibrium
| Type | Example | What's equal | Closed system? |
|---|---|---|---|
| Physical equilibrium | Sealed flask with liquid H₂O | Evaporation rate = condensation rate | Yes |
| Chemical equilibrium | N₂ + 3H₂ ⇌ 2NH₃ | Forward rate = reverse rate | Yes |
Top 15 Exam Traps
- Always convert °C to Kelvin before using gas law formulas (K = °C + 273).
- Dissolving is a PHYSICAL change — NaCl can be recovered by evaporation.
- Activation energy (Ea) is measured from REACTANTS up to the peak — not from zero.
- Catalyst lowers Ea but does NOT change ΔH or shift equilibrium position.
- CO₂ has polar bonds but is a nonpolar MOLECULE — linear geometry cancels dipoles.
- Ionic solids do NOT conduct electricity — only when molten or dissolved (ions mobile).
- Saturated ≠ concentrated. Saturated = at maximum capacity (on the solubility curve line).
- pH scale is LOGARITHMIC: each 1-unit difference = 10× change in [H⁺].
- Single replacement: check Table J first. If replacing element is lower → NR.
- Only COEFFICIENTS can be changed when balancing — never subscripts.
- Voltaic vs. electrolytic: anode terminal signs flip, but oxidation is ALWAYS at the anode.
- Nuclear equations: BOTH mass numbers AND atomic numbers must balance.
- Half-life is constant — unaffected by temperature, pressure, or chemical form.
- Excited state still has the correct number of electrons — they're just not in lowest levels.
- Strength ≠ concentration — a dilute HCl solution is still a STRONG acid (100% ionized).
Exam Day Checklist
- Use Table T first — it lists all the formulas you'll need.
- Know which Reference Table to use: J (activity series), F (precipitates), M (indicators), N (radioisotopes), G (solubility curves).
- Show all work with units. Dimensional analysis prevents errors.
- Start with questions you know best; circle and skip difficult ones.
- Gas laws: write down given values, identify what's constant, pick the right formula.
- Nuclear equations: always verify mass numbers AND atomic numbers balance.
- For PE diagrams: mark reactants, peak, and products before reading Ea or ΔH.
- Treat heat as a substance (reactant or product) for Le Chatelier problems.
- Oxidation number assignments: use the 8 rules in priority order.
- Check units in your final answer before moving on.