0% of the question bank attempted

Position, Displacement & Distance

Position locates an object relative to an origin; displacement is the vector change in position, while distance is the scalar path length traveled.

Velocity & Acceleration

Velocity is the rate of change of position; acceleration is the rate of change of velocity.

Average Speed Over Several Legs & Unit Conversion

Average speed always comes from total distance and total time, never from averaging two speeds. Converting units correctly is half the battle on real problems.
  • Average speed = total distance ÷ total time. Average velocity = displacement ÷ time. For a trip with several legs, add the distances and add the times first.
  • Example: 60 km at 30 km/h takes 2 h, and 60 km at 60 km/h takes 1 h. The average speed is 120 km ÷ 3 h = 40 km/h, not the simple average of 45 km/h. Slow legs last longer, so they count for more.
  • A runner who finishes one lap of a track has average velocity 0 (displacement 0) but average speed greater than 0 (distance = the lap length).
  • Moving around a circle at a steady speed is not constant velocity: the direction keeps changing, so the velocity (and therefore the acceleration) is not zero.
  • Unit conversion: 1 m/s = 3.6 km/h. To go from km/h to m/s, divide by 3.6; to go the other way, multiply by 3.6. So 72 km/h = 20 m/s.
  • Watch: The Organic Chemistry Tutor: Distance, Displacement, Average Speed, Average Velocity · Step by Step Science: Speed vs. Velocity

Speeding Up or Slowing Down: Signs of Velocity and Acceleration

Whether an object speeds up or slows down depends on how the signs of its velocity and acceleration compare, not on the sign of the acceleration alone.

Uniform Motion & Constant Velocity

Uniform motion is motion with constant velocity: the speed does not change and neither does the direction.
  • In one dimension, uniform motion means constant velocity, with the same magnitude and the same direction. Cruise control on a straight, level road is a good example.
  • Because velocity is constant, acceleration is zero (a = 0).
  • Position follows x = x₀ + vt, so equal time intervals always give equal displacements.
  • Constant speed alone is not enough. A car that holds a steady speed around a curve is not in uniform motion, because its direction keeps changing.
  • Watch: Khan Academy Physics: Position vs. time graphs

Position–Time Graphs: Slope Is Velocity

A position–time graph tells the whole story of where an object is. Its slope is the object’s velocity.
  • A straight line on a position–time graph means constant velocity. The slope is Δx/Δt, so its value is the velocity in m/s.
  • The sign of the slope gives the direction: positive slope means motion in the positive direction, negative slope means motion in the negative direction. A steeper line means a greater speed, and a horizontal line means the object is at rest.
  • A curved line means the velocity is changing. The instantaneous velocity at a point is the slope of the tangent line at that point; the average velocity over an interval is the slope of the straight line joining its two ends.
  • Where the curve flattens out (zero slope) the object is momentarily at rest, as when it stops and turns around.
  • Watch: Khan Academy Physics: Position vs. time graphs · Khan Academy: Slope of the tangent gives us instantaneous velocity
Constant velocity: two objects
-120122402468Time (s)Position (m)Object A: +3 m/sObject B: −3 m/s

Two objects in uniform motion. Object A (slope +3 m/s) moves in the positive direction; Object B (slope −3 m/s) moves in the negative direction. They meet at 4 s.

Average and instantaneous velocity
0612180123456Time (s)Position (m)average velocity: slopeof the dashed lineinstantaneous velocity at 3 s:slope of the solid tangent line

On a curved position–time graph, the slope of the dashed secant line is the average velocity (2 m/s from 0 to 4 s) and the slope of the tangent line is the instantaneous velocity (3 m/s at 3 s).

Reading a curve with turning points
0246810012345678Time (s)Position (m)(1)(2)(3)(4)(5)

At point (1) the slope is positive, at (2) it is zero (the object stops and turns), at (3) it is negative, at (4) it is zero again, and at (5) it is positive.

Velocity–Time Graphs: Slope and Area

A velocity–time graph links three quantities: its height is velocity, its slope is acceleration and the area under it is displacement.
  • The slope of a v–t graph is the acceleration. A horizontal line has zero slope, so there is no acceleration and the velocity is constant.
  • A positive slope means velocity is increasing in the positive direction; a negative slope means it is decreasing. A positive slope does not always mean the object speeds up: if the velocity is negative, a positive slope slows the object down.
  • The area between the graph and the time axis is the displacement. Area above the axis counts as positive, area below counts as negative. Distance adds both areas as positive numbers.
  • When the graph crosses zero velocity, the object stops for an instant and reverses direction.
  • On an acceleration–time graph, the area under the line is the change in velocity.
  • Watch: Khan Academy Physics: Acceleration vs. time graphs · Zak’s Lab: velocity-time graphs, slope and area · Cowen Physics: Displacement-time and velocity-time graphs
Constant velocity: area is displacement
024602468Time (s)Velocity (m/s)Area = 3 m/s × 5 s = 15 m

A horizontal line at 3 m/s for 5 s: the rectangle’s area is 3 × 5 = 15 m of displacement.

Speeding up, cruising, slowing down
02468012345678Time (s)Velocity (m/s)

Slope 0–2 s: +3 m/s². Slope 2–5 s: 0. Slope 5–8 s: −2 m/s². The area of the trapezoid, 33 m, is the displacement.

Velocity that changes sign
-6-30360123456Time (s)Velocity (m/s)

The velocity falls from +6 m/s to −6 m/s at −2 m/s². The object stops at 3 s and turns around; the area above (+9 m) cancels the area below (−9 m), so the displacement is 0 m but the distance is 18 m.

Linking the Three Motion Graphs

Position, velocity and acceleration graphs describe the same motion. Taking a slope moves you one step down the chain, and taking an area moves you one step back up.
  • From x–t to v–t, take the slope. From v–t to a–t, take the slope. From a–t to v–t, take the area (it equals the change in velocity). From v–t to x–t, take the area (it equals the displacement).
  • On an x–t graph the vertical intercept is the starting position, and a horizontal line means the object is at rest. Where two x–t lines cross, the objects are at the same place at the same time, not necessarily moving at the same speed.
  • A constant acceleration makes the x–t graph a parabola. A curve that gets steeper means the object is speeding up; one that gets flatter means it is slowing down. A parabola that opens upward means positive acceleration, one that opens downward means negative acceleration.
  • The peak or valley of an x–t parabola is where the slope is zero: the object is momentarily at rest, often at the turnaround point.
  • Area shortcuts for a v–t graph: rectangle = base × height, triangle = ½ × base × height, trapezoid = ½(v₀ + v)t. Areas above the time axis are positive and areas below are negative.
  • Watch: Khan Academy Physics: Position vs. time graphs · Khan Academy Physics: Acceleration vs. time graphs
The three graphs of one motion
position x (m)time (s)0123049velocity v (m/s)time (s)012306acceleration a (m/s²)time (s)012302

A constant acceleration of 2 m/s² from rest: the a–t graph is flat at 2, the v–t graph is a line with slope 2 (v = 2t), and the x–t graph is a parabola (x = t²). Taking the slope of each graph gives the next one down.

Kinematic Equations (Constant Acceleration)

For motion with constant acceleration, four kinematic equations relate displacement, velocity, acceleration, and time.

Choosing a Kinematic Equation

Each constant-acceleration equation leaves out exactly one of the five variables. Choosing the right one is a matter of listing what you know and what you want.

Stopping Distance and Speed Squared

Braking problems show why speed matters so much: the stopping distance grows with the square of the speed.

Free Fall and the Acceleration of Gravity

An object in free fall is moving under the influence of gravity alone. Near Earth’s surface every such object has the same acceleration, no matter its mass.
  • Free fall includes objects released from rest and objects thrown upward or downward, from the moment they are released.
  • Aristotle taught that heavier objects fall faster in proportion to their weight. Galileo (1564–1642) argued that, in the same medium, bodies fall with the same acceleration.
  • In air a feather falls more slowly than a coin because of air resistance. In a vacuum, or on the Moon where there is no atmosphere, they fall together.
  • The acceleration due to gravity near Earth’s surface is g ≈ 9.8 m/s² (often given as 9.81 m/s²), directed downward. On the Moon it is about 1.6 m/s².
  • “Falling at the same speed” is misleading. Objects fall with the same acceleration, so their speeds match only when they are compared at the same time after release from rest.
  • Watch: NASA Solar System: Apollo 15 Hammer-Feather Drop · BBC: Brian Cox visits the world’s biggest vacuum · Step by Step Science: What is Free Fall?
Free fall from rest
accelerationtime (s)0123−9.80velocitytime (s)01230−29.4position (below start)time (s)01230−44.1

For an object dropped from rest (down is negative): acceleration is a constant −9.8 m/s², velocity falls by 9.8 m/s every second (−29.4 m/s at 3 s), and position curves downward (−44.1 m at 3 s).

Free-Fall Equations: Dropped Objects

Free fall is constant-acceleration motion with a = ±9.8 m/s², so the kinematic equations apply directly.
  • For an object dropped from rest, with down taken as positive: v = gt, d = ½gt² and v² = 2gd.
  • With up taken as positive, the acceleration is a = −g = −9.8 m/s², and that negative value is put into the kinematic equations. Pick one sign convention and keep it for the whole problem.
  • After 1, 2 and 3 s of falling from rest the speed is 9.8, 19.6 and 29.4 m/s, and the distance fallen is 4.9, 19.6 and 44.1 m. Distance grows with t², speed with t.
  • Mass does not appear in any free-fall equation.
  • Watch: The Organic Chemistry Tutor: Free Fall Physics Problems · How To Physics: Free Fall Motion Problems (Dropped Objects)

Objects Thrown Vertically

A ball thrown straight up slows on the way up, stops for an instant, and speeds up on the way down, all with the same downward acceleration.
Height of a ball thrown up at 19.6 m/s
0510152001234Time (s)Height (m)top: 19.6 m at 2.0 s

Launched at 19.6 m/s, the ball takes 2.0 s to reach the top (19.6 m) and 4.0 s to return to the ground. The path is symmetric.

Reaction Time with a Falling Ruler

A dropped ruler turns free fall into a stopwatch: how far it falls before you catch it tells you your reaction time.
Ruler-catch table
Ruler caught at (cm)Fall time t (s)50.101100.143150.175200.202250.226

Fall time for a ruler caught after falling d, using t = √(2d/g) with g = 9.8 m/s².

Free Fall & Projectile Motion

Free fall is motion under gravity alone (a = −9.8 m/s² near Earth's surface); projectile motion combines horizontal (constant velocity) and vertical (constant acceleration) motion independently.

Graphical Analysis of Motion

Position, velocity, and acceleration graphs are linked through slope and area relationships.

Relative Motion & Vectors in 2D

Vector quantities in kinematics (displacement, velocity, acceleration) must be added using vector addition, and can be decomposed into perpendicular components.

Kinematics: Common Mistakes

Most lost points in kinematics come from a short list of repeated slips. Check your work against it.
  • Mixing up distance with displacement, or speed with velocity.
  • Using the constant-acceleration equations when the acceleration is not constant.
  • Forgetting to square t in Δx = v₀t + ½at².
  • Treating negative acceleration as slowing down automatically, or thinking zero velocity means zero acceleration.
  • Averaging speeds instead of dividing total distance by total time.
  • Reading the slope of a v–t graph as velocity (it is the acceleration), or reading the area under an x–t graph as something useful (it is not).
  • Forgetting to convert units (km/h to m/s, minutes to seconds).
  • Using +9.8 in one equation and −9.8 in another, or forgetting that time must be positive after taking a square root.
  • Watch: Beat Physics: Masterclass in Kinematics Problem-Solving · Flipping Physics: AP Physics 1 Unit 1 Review, Kinematics

Kinematics Formula Sheet & Checklist

One page to review before a quiz: the equations, the graph rules and a short checklist.
  • Displacement Δx = x_f − x_i (m). Average speed = total distance ÷ total time. Average velocity = Δx/Δt. Acceleration a = (v − v₀)/t (m/s²).
  • Constant acceleration: v = v₀ + at; Δx = v₀t + ½at²; v² = v₀² + 2aΔx; Δx = ½(v₀ + v)t. Free fall from rest: v = gt, d = ½gt², v² = 2gd, with g = 9.8 m/s² downward.
  • Graph rules: x–t slope = velocity; v–t slope = acceleration; v–t area = displacement; a–t area = change in velocity.
  • Checklist: I can explain distance vs. displacement and speed vs. velocity. I know what slope and area mean on every graph. I can tell speeding up from slowing down from the signs of v and a. I know all four equations and when to use each. I remember that g is 9.8 m/s² downward at every point of a free-fall path. I check units, signs and whether the answer is reasonable.
  • Watch: The Organic Chemistry Tutor: Kinematics In One Dimension · Flipping Physics: AP Physics 1 Unit 1 Review, Kinematics · Beat Physics: AP Physics 1 Unit 1 Full Kinematics Review
Velocity and acceleration can point in different directions (deceleration is negative-signed a relative to v, not always 'negative a'), not 'acceleration always means speeding up'
At the top of a projectile's path, vertical velocity is zero but vertical acceleration is still −g, not zero
Distance traveled equals |displacement| only for one-directional motion, not always equal in general
A steeper x-t graph means greater speed, not greater position; curvature (not steepness alone) indicates acceleration

Newton's First Law (Inertia)

An object remains at rest or in uniform motion unless acted on by a net external force.

Newton's Second Law (F = ma)

The net force on an object equals its mass times its acceleration, and acceleration is in the direction of the net force.

Newton's Third Law

For every action force there is an equal and opposite reaction force acting on a different object.

Common Forces: Weight, Normal, Tension, Friction

Several named forces recur throughout dynamics problems and each has a specific formula and direction.

Inclined Planes & Multi-Body Systems

On an incline, gravity is decomposed into components parallel and perpendicular to the surface; connected objects (via strings/pulleys) share acceleration magnitude.

Applications: Elevators & Apparent Weight

Apparent weight (the normal force felt) differs from true weight when an object accelerates vertically, as in an elevator.
A moving object needs a net force only to change its velocity, not to keep moving at constant velocity ('no force needed to sustain motion' is correct, not 'motion requires continuous force')
Action-reaction pairs act on two different objects and never cancel each other for a single free-body diagram, not 'forces on the same object cancel'
Normal force is not always equal to mg — it depends on other forces and acceleration (e.g., on an incline or in an elevator), not a fixed value
Static friction is a variable up to a maximum ($μ_s$ N), not always exactly $μ_s$ N

Uniform Circular Motion & Centripetal Acceleration

An object moving in a circle at constant speed still accelerates because its velocity direction constantly changes; this acceleration points toward the center of the circle.

Centripetal Force

Centripetal force is not a new type of force but the net force directed toward the center that causes circular motion; it must be supplied by real forces (tension, gravity, friction, normal force).

Vertical Circular Motion

When circular motion occurs in a vertical plane, gravity adds to or subtracts from the required centripetal force depending on position in the loop.

Newton's Law of Universal Gravitation

Every pair of masses attracts each other with a force proportional to the product of their masses and inversely proportional to the square of the distance between their centers.

Orbital Motion

A satellite or planet in a stable circular orbit has gravity acting as the sole centripetal force, which links orbital speed and period to the orbit's radius.

Kepler's Laws & Gravitational Potential Energy

Kepler's laws describe planetary orbits, and gravitational potential energy (defined as zero at infinite separation) is always negative for a bound system.
Centripetal force is the net inward force supplied by real forces (tension, gravity, friction, normal), not a separate force you add to a free-body diagram
If centripetal force disappears, an object flies off tangent to the circle (in a straight line), not radially outward
Orbital speed and period depend only on the central mass and orbital radius, not on the orbiting satellite's own mass
Doubling the orbital radius does NOT halve the orbital speed — v ∝ 1/√r, so speed decreases by a factor of √2

Rotational Kinematics

Rotational motion uses angular analogues of the linear kinematic quantities and equations, connected to linear quantities through the radius.

Torque

Torque is the rotational analogue of force — it measures how effectively a force causes angular acceleration about a pivot, depending on both the force and where/how it's applied.

Moment of Inertia

Moment of inertia is the rotational analogue of mass — it measures an object's resistance to changes in angular velocity, depending on both mass and how that mass is distributed relative to the axis.
  • I = $Σm_i$ $r_i$² for point masses; distributed mass is found by integration or standard formulas
  • Common formulas: solid sphere I = ₅⁄₂MR², solid disk/cylinder I = ½MR², hoop/ring I = MR², rod about center I = ¹⁄₁₂ML², rod about end I = ₁⁄₃ML²
  • Mass farther from the axis contributes more to I (I depends on r², not just mass)
  • The same object has a different I depending on the chosen rotation axis
  • Parallel axis theorem: I = $I_{cm} + Md$², where d is the distance from the center-of-mass axis to the new axis
  • Watch: Bozeman Science: Rotational Inertia · James Dann, Ph.D.: Moment of Inertia Explained

Rotational Dynamics & Equilibrium

Newton's second law has a rotational form relating net torque to angular acceleration, and static equilibrium requires both zero net force and zero net torque.

Angular Momentum & Its Conservation

Angular momentum is the rotational analogue of linear momentum, and it is conserved for a system when there is no net external torque.

Rotational Kinetic Energy & Rolling Motion

A rotating object stores kinetic energy in its rotation, and a rolling object has both translational and rotational kinetic energy.
Torque depends on where a force is applied and its angle to the lever arm, not just its magnitude — a large force applied along the lever arm produces zero torque
Moment of inertia depends on the axis of rotation, not just the object's mass — the same object has different I values about different axes
Angular momentum conservation applies even when kinetic energy is not conserved, not 'both are always conserved together'
Rolling without slipping requires $v_{cm} = ωr$; a sliding (skidding) object does not satisfy this relationship

Momentum & Impulse

Momentum is the product of mass and velocity, and impulse is the change in momentum caused by a force acting over time.

Conservation of Momentum

In an isolated system (no external net force), total momentum before an interaction equals total momentum after.

Elastic vs. Inelastic Collisions

Collisions are classified by whether kinetic energy is conserved in addition to momentum.

Solving Collision Problems

Collision problems use conservation of momentum (always) and conservation of kinetic energy (only if elastic) as simultaneous equations.

Center of Mass

The center of mass is the weighted average position of a system's mass, and it moves according to the net external force on the whole system.

2D Momentum & Real-World Applications

Momentum conservation extends to two dimensions by conserving x- and y-components independently, applicable to collisions, sports, and vehicle safety design.
Kinetic energy is generally NOT conserved in real-world (inelastic) collisions, even though momentum always is, not 'both are always conserved together'
Momentum is a vector — velocities in opposite directions must be given opposite signs, not treated as simply additive magnitudes
A larger force isn't needed for a bigger impulse if time increases proportionally — impulse depends on both F and Δt, not force alone
The center of mass of a system continues on its original path during an internal explosion or collision (external force unchanged), not 'the pieces ignore the original motion'

Work Done by a Force

Work is the transfer of energy via a force acting through a displacement, and depends on the angle between force and displacement.

Kinetic Energy & the Work-Energy Theorem

Kinetic energy is the energy of motion, and the net work done on an object equals its change in kinetic energy.

Potential Energy: Gravitational & Elastic

Potential energy is stored energy associated with an object's position or configuration, recoverable as kinetic energy.

Conservation of Mechanical Energy

In the absence of non-conservative forces (like friction), total mechanical energy (KE + PE) remains constant.

Power

Power is the rate at which work is done or energy is transferred.

Energy Diagrams & Systems

Energy bar charts and system diagrams track how energy transforms and transfers between kinetic, potential, and thermal forms.
  • A closed/isolated system conserves total energy; energy only transforms between forms
  • Energy bar charts show relative amounts of KE, PE, and thermal energy at different points
  • Non-conservative forces (friction, applied pushes) change total mechanical energy of a system
  • Choosing the system boundary determines whether work is 'external' or energy transformation is 'internal'
  • Elastic collisions conserve KE; inelastic collisions convert some KE to other forms (heat, sound, deformation)
  • Watch: Brent Holt: Potential Energy Graphs and Stability · Grant Volle: Video 8.4: Potential Energy Graphs
Work done by a force perpendicular to displacement is zero, not simply 'less work' — cosθ=0 makes it exactly zero (e.g., normal force does no work on a moving object)
Potential energy is only meaningful as a difference/change (ΔPE), not an absolute value — the reference point is arbitrary
Kinetic energy depends on speed squared, so doubling velocity quadruples KE, not just doubles it
Friction converts mechanical energy to thermal energy (it doesn't destroy energy) — total energy is still conserved, only mechanical energy decreases

Electric Charge & Coulomb's Law

Electric charge is a fundamental property of matter that comes in two types (positive and negative), and Coulomb's law describes the force between two point charges.

Electric Fields

An electric field is the region around a charge where another charge would feel a force, defined as force per unit charge.

Electric Potential Energy & Potential

Electric potential energy is the energy stored due to the position of a charge in a field, and electric potential is potential energy per unit charge.
  • Electric potential V = U/q, units volts (V) = J/C
  • Potential difference (voltage) drives current: ΔV = W/q, the work done per unit charge moving between two points
  • For a uniform field: E = ΔV/d, relating field strength to voltage across a distance d
  • Positive charges move from high to low potential naturally (like a ball rolling downhill); electrons move from low to high potential
  • Equipotential surfaces are always perpendicular to electric field lines, and no work is done moving a charge along one
  • Watch: Khan Academy: Voltage · The Organic Chemistry Tutor: Electric Potential

Current, Resistance & Ohm's Law

Electric current is the rate of charge flow through a conductor, and Ohm's law relates voltage, current, and resistance for many materials.

Series & Parallel Circuits

Resistors combine differently depending on whether they are connected in series (single path) or parallel (multiple paths), affecting current, voltage, and equivalent resistance.

Kirchhoff's Rules & Circuit Analysis

Kirchhoff's rules formalize conservation of charge and energy in circuits, allowing analysis of complex multi-loop networks.
Adding a resistor in parallel decreases total resistance (creates another path for current), not increases it like adding one in series
Current is the same through every resistor in series, not the voltage — voltage divides; in parallel, voltage is the same and current divides
Equivalent resistance of resistors in parallel is always less than the smallest individual resistor, not an average of the values
Conventional current direction (+ to −) is opposite to the actual direction electrons move, which matters when interpreting circuit diagrams

Magnetic Fields & Field Lines

A magnetic field is a region where a moving charge or current experiences a force; field lines show its direction and relative strength.

The Right-Hand Rule

The right-hand rule gives the direction of a magnetic field or force whenever velocity, current, or field direction are mutually perpendicular.
  • For a straight wire: point the thumb along conventional current; the curled fingers show the field direction circling the wire
  • For force on a moving positive charge: point fingers along v, curl toward B; the thumb gives F (F = qv×B)
  • For a negative charge, the force is opposite the direction the rule gives for a positive charge
  • For a current loop: curling the fingers along the current direction, the thumb points along the loop's magnetic field (like a bar magnet's north pole)
  • Swapping any one of v, B, or F direction (holding the others fixed) reverses the sign of the missing quantity
  • Watch: Flipping Physics: Magnetic Force Direction (Right-Hand Rule) · Dan the Tutor: How to Use the Right Hand Rule in Physics E&M

Force on a Moving Charge

A magnetic field exerts a force on a moving charge, but only on the velocity component perpendicular to the field.

Force on a Current-Carrying Wire

Since current is charge in motion, a current-carrying wire in a magnetic field experiences a force.

Magnetic Field of a Current-Carrying Wire

A current-carrying wire generates its own magnetic field circling around it, and coils of wire concentrate this field.

Electromagnetic Induction

A changing magnetic flux through a loop induces an EMF (Faraday's Law), and the induced current opposes that change (Lenz's Law) — the basis of generators.
The magnetic force on a moving charge does no work and cannot change its speed — only its direction, since F is always perpendicular to v
A charge moving parallel (or antiparallel) to B feels zero magnetic force, not maximum force — maximum force occurs at 90°
Lenz's Law is about opposing the CHANGE in flux, not opposing the flux itself — a steady, unchanging flux induces no EMF at all
The right-hand rule (not left-hand) is used for conventional current and positive charges; use it carefully in reverse for negative charges

Wave Properties & the Wave Equation

Waves transfer energy without net transfer of matter, and their properties are related through a single equation connecting speed, wavelength, and frequency.

Superposition & Interference

When two or more waves overlap in the same medium, their displacements add algebraically (superposition), producing constructive or destructive interference.
  • Principle of superposition: net displacement = sum of individual wave displacements at that point
  • Constructive interference occurs when waves are in phase (crest meets crest), producing a larger amplitude
  • Destructive interference occurs when waves are out of phase (crest meets trough), reducing or canceling amplitude
  • Path difference of a whole number of wavelengths (nλ) gives constructive interference; a half-integer number ((n+½)λ) gives destructive interference
  • After waves pass through each other, they continue unaffected (superposition is temporary, not permanent)
  • Beats occur when two waves of slightly different frequencies interfere, producing a periodic amplitude variation with beat frequency $f_{beat}$ = |f₁ − f₂|
  • Watch: Flipping Physics: Wave Superposition Introduction · Dan the Tutor: Constructive and Destructive Interference Physics

Standing Waves & Resonance

Standing waves form when two identical waves traveling in opposite directions interfere, creating fixed points of no displacement (nodes) and maximum displacement (antinodes).

Sound Waves

Sound is a longitudinal pressure wave that requires a medium to travel, with speed depending on the properties of that medium.

The Doppler Effect

The Doppler effect is the change in observed frequency of a wave when there is relative motion between the source and the observer.
  • Frequency increases when the source and observer are moving toward each other, decreases when moving apart
  • General formula: $f_{observed} = f_{source}$ × (v ± $v_{observer}$)/(v ∓ $v_{source}$), using + for approach and − for recession in each term
  • Only relative motion along the line connecting source and observer matters
  • The Doppler effect changes the observed frequency (and wavelength), not the actual speed of the wave in the medium
  • Applications: radar guns, redshift/blueshift of light from stars, weather Doppler radar
  • Watch: The Organic Chemistry Tutor: How To Solve Doppler Effect Physics Problems · Bozeman Science: Doppler Effect

Wave Behavior at Boundaries

When a wave reaches a boundary between media, part of it reflects and part transmits, with the details depending on the relative properties of the two media.
Wave frequency is determined by the source and stays the same when a wave enters a new medium — wavelength and speed change, not frequency
A closed-open pipe only supports odd harmonics ($f_n = nv/4$L, n=1,3,5...), unlike an open-open pipe or a string, which supports all integer harmonics
The Doppler effect changes the observed frequency, not the actual wave speed through the medium
Sound cannot travel through a vacuum because it is a mechanical (longitudinal) wave requiring a medium, unlike light

Reflection & Plane Mirrors

The law of reflection governs how light bounces off a surface, and plane mirrors use it to form images.
  • Law of reflection: angle of incidence = angle of reflection, both measured from the normal (a line perpendicular to the surface)
  • A plane mirror forms a virtual, upright image the same size as the object, located as far behind the mirror as the object is in front
  • A virtual image cannot be projected on a screen because light rays only appear to diverge from it
  • Diffuse reflection (off a rough surface) scatters light in many directions; specular reflection (off a smooth surface) preserves a clear image
  • Watch: The Science Classroom: The Law of Reflection and Plane Mirrors · Hamilton Math: Reflection in Plane Mirrors

Curved Mirrors

Concave mirrors curve inward and can form real or virtual images; convex mirrors curve outward and always form virtual, reduced images.

The Mirror Equation & Magnification

The mirror equation relates object distance, image distance, and focal length; magnification compares image and object size.

Refraction & Snell's Law

Refraction is the bending of light as it passes between media with different indices of refraction, due to a change in speed.

Total Internal Reflection

When light travels from a denser to a less dense medium at a steep enough angle, it reflects entirely back into the denser medium instead of refracting out.

Lenses & Dispersion

Lenses refract light to form images using the same equations as mirrors; dispersion splits light into its component colors because n depends on wavelength.
  • A converging (convex) lens brings parallel rays together at a focal point; a diverging (concave) lens spreads them apart
  • Thin lens equation: 1/dₒ + 1/dᵢ = 1/f (same form as the mirror equation); magnification m = −dᵢ/dₒ
  • For a converging lens, an object beyond f forms a real, inverted image; an object inside f forms a virtual, upright, magnified image (like a magnifying glass)
  • A diverging lens always forms a virtual, upright, reduced image, regardless of object distance
  • Dispersion occurs because the index of refraction depends slightly on wavelength (higher n for shorter wavelengths); a prism splits white light into a spectrum with violet bending most and red bending least
  • Watch: The Organic Chemistry Tutor: Thin Lens Equation Converging and Dverging Lens Ray Diagram & Sign… · Tonya Coffey: Thin lenses: ray diagrams and equations
A virtual image is not fainter or fake — it looks completely real to an observer, it just can't be projected onto a screen because rays only appear to diverge from it
Light bends TOWARD the normal entering a denser medium and AWAY from the normal entering a less dense one — mixing this up flips every refraction diagram
Total internal reflection requires going from higher n to lower n; light can never totally internally reflect when entering a denser medium
Frequency (and color) of light never changes when it refracts — only its speed and wavelength change, which is why a ray stays the same color across a boundary

Wave-Particle Duality & the Photoelectric Effect

Light exhibits both wave and particle behavior; the photoelectric effect — where light ejects electrons from a metal — can only be explained by treating light as discrete photons.

De Broglie Wavelength

Just as light exhibits particle behavior, matter exhibits wave behavior — every moving particle has an associated wavelength.

Atomic Spectra & Energy Levels

Electrons in an atom can only occupy specific, quantized energy levels; transitions between levels absorb or emit photons of specific energies.

Nuclear Decay

Unstable nuclei spontaneously emit particles or radiation to become more stable, transforming into different nuclides in the process.

Half-Life

Half-life is the time required for half of a sample of radioactive nuclei to decay, and it is constant regardless of the sample size.

Mass-Energy Equivalence, Fission & Fusion

Mass and energy are equivalent (E = mc²); nuclear reactions convert a small amount of mass into a large amount of energy.
  • Mass-energy equivalence: E = mc², where c = 3.00×10⁸ m/s, so even a tiny mass converts to enormous energy
  • Nuclear fission splits a heavy nucleus (like uranium-235) into smaller nuclei, releasing energy — used in nuclear power plants and weapons
  • Nuclear fusion combines light nuclei (like hydrogen isotopes) into a heavier nucleus, releasing energy — the process that powers the Sun
  • In both fission and fusion, the total mass of the products is slightly less than the reactants; this 'mass defect' converts to the released energy via E = mc²
  • Fusion releases more energy per unit mass than fission, but requires extremely high temperatures and pressures to overcome nuclear repulsion
  • Watch: Allen Tsao The STEM Coach: AP Physics 2 - Unit 15 - Lesson 3 - Mass-Energy Equivalence · Nutshell Physics: Binding energy, Fission, Fusion: Nuclear Radiation: Edexcel A-level…
Increasing light intensity increases the NUMBER of photoelectrons, not their maximum kinetic energy — only increasing frequency increases KEmax
Below the threshold frequency, no electrons are ejected no matter how intense the light is — intensity cannot substitute for insufficient photon energy
In beta-minus decay the atomic number increases (a neutron becomes a proton), even though no proton was 'added' from outside the nucleus
Half-life does not mean 'the sample is gone after two half-lives' — after 2 half-lives, 1/4 remains, not zero; it approaches zero asymptotically but never mathematically reaches it
Term
Press Enter or Space to flip the card. Left and right arrows move between cards. 1 marks it known, 2 marks it still learning.
Click or press Enter to flip · Rate yourself to track weak cards
Browse all 120 flashcards as a list

Unit 1: Kinematics

Displacement
The vector change in position, Δx = $x_f − x_i$; depends only on initial and final points, not the path taken.
Instantaneous Velocity
The slope of the tangent line to a position-time graph at a specific instant; the derivative of position with respect to time.
Acceleration
The rate of change of velocity with respect to time, a = Δv/Δt, measured in m/s².
Kinematic Equation: v = v₀ + at
Relates final velocity to initial velocity, constant acceleration, and time; used when displacement is not needed.
Kinematic Equation: Δx = v₀t + ½at²
Gives displacement in terms of initial velocity, constant acceleration, and time.
Free Fall
Motion under gravity alone, with constant downward acceleration g = 9.8 m/s², independent of the object's mass.
Projectile Motion
Two-dimensional motion with constant horizontal velocity and constant vertical acceleration (−g), analyzed by treating each axis independently.
Range of a Projectile
R = v₀²sin(2θ)/g for equal launch and landing heights; maximized at a launch angle of 45°.
Position-Time Graph
A graph where the slope at any point equals the instantaneous velocity; a parabolic shape indicates constant acceleration.
Velocity-Time Graph
A graph where the slope equals acceleration and the area under the curve equals displacement.
Uniform motion
Motion with constant velocity: constant speed and constant direction, so a = 0.
Average velocity
Displacement divided by time; the slope of the line joining two points on a position–time graph.
Acceleration due to gravity
About 9.8 m/s² downward near Earth’s surface, the same for all objects when air resistance is negligible.
Air resistance
A force that opposes motion through air; it is why a feather falls slower than a coin outside a vacuum.
Reaction time from free fall
For a ruler dropped from rest, t = √(2d/g), where d is the distance it falls before it is caught.
Area under a v–t graph
The displacement of the object during that time interval.
Average speed over several legs
Total distance ÷ total time; never the simple average of the leg speeds.
Stopping distance
The distance to brake to rest, v₀²/(2|a|); it grows with the square of the speed.
Hidden information
Clues in a kinematics problem: “from rest” means v₀ = 0, “stops” means v = 0, “at the top” means v = 0.
Two-part motion
A problem solved in stages; the final velocity of one stage is the initial velocity of the next.
Graph chain
x–t slope gives v–t; v–t slope gives a–t; a–t area gives Δv; v–t area gives displacement.

Unit 2: Dynamics & Newton's Laws

Newton's First Law
An object at rest stays at rest, and an object in motion stays in motion at constant velocity, unless acted on by a net external force.
Newton's Second Law
ΣF = ma; the net force on an object equals the product of its mass and acceleration, with acceleration in the direction of net force.
Newton's Third Law
For every action force one object exerts on another, the second object exerts an equal and opposite force back on the first.
Normal Force
The perpendicular contact force a surface exerts on an object, preventing it from passing through the surface; not always equal to weight.
Static Friction
The force resisting the start of sliding between surfaces in contact, with maximum value $f_s$(max) = $μ_s$ N.
Kinetic Friction
The force opposing relative sliding motion between two surfaces, given by $f_k = μ_k$ N, generally less than max static friction.
Tension
The pulling force transmitted through a string, rope, or cable; uniform throughout an ideal massless string over a frictionless pulley.
Free-Body Diagram
A diagram showing all external forces acting on a single object as vectors, used to apply Newton's Second Law systematically.
Apparent Weight
The normal force experienced by an object, which differs from true weight (mg) when the object has vertical acceleration, such as in an elevator.
Inclined Plane Decomposition
Gravity on an incline splits into components mg sinθ (along the slope) and mg cosθ (perpendicular to the slope, balanced by normal force).

Unit 3: Circular Motion & Gravity

Centripetal acceleration
$a_c = v^2/r = omega^2$ r; always points toward the center of the circular path, even at constant speed.
Centripetal force
$F_c = mv^2/r$, the net inward force supplied by real forces (tension, gravity, friction, normal force) that causes circular motion.
Newton's Law of Universal Gravitation
$F_g$ = Gm1m2/$r^2$, where G = 6.674x10^-11 N*$m^2/kg^2$; always attractive, acts along the line joining the masses.
Orbital speed
v = $sqrt{GM/r}$ for a circular orbit, derived by setting gravity equal to the required centripetal force.
Kepler's Third Law
$T^2$ is proportional to $r^3$ for all objects orbiting the same central body.
Gravitational potential energy
Stored energy due to position in a gravitational field. Near Earth's surface $U_g$ = mgh, measured relative to a chosen reference level. In general $U_g$ = -GMm/r, zero at infinite separation and always negative for a bound system.
Escape velocity
$v_{esc} = sqrt{2GM/r}$, the minimum launch speed needed to escape a gravitational field from radius r.
Minimum speed at top of a vertical loop
$v_{min} = sqrt{gr}$, the speed at which normal force drops to zero and gravity alone supplies centripetal force.
Angular velocity (omega)
omega = v/r = 2*pi*f, the rate of angular rotation in radians per second; relates to linear speed via v = omega*r.
Banked curve
On a frictionless banked curve, a component of the normal force provides centripetal force: tan(theta) = $v^2$/(rg).

Unit 4: Rotational Motion

Torque
tau = rF*sin(theta), the rotational analogue of force; measures how effectively a force causes angular acceleration about a pivot.
Moment of inertia
I = sum(m*$r^2$); the rotational analogue of mass, depending on both mass and its distribution relative to the rotation axis.
Rotational Newton's Second Law
Net torque equals moment of inertia times angular acceleration: sum(tau) = I*alpha.
Angular momentum
L = I*omega for a rigid body; conserved when net external torque on a system is zero.
Parallel axis theorem
I = $I_{cm} + M$*$d^2$, used to find moment of inertia about an axis parallel to one through the center of mass, a distance d away.
Rotational kinetic energy
$KE_{rot}$ = (1/2)*I*$omega^2$, the kinetic energy stored in a rotating object.
Rolling without slipping condition
$v_{cm}$ = omega*r and $a_{cm}$ = alpha*r; static friction (not kinetic) allows rolling without energy loss.
Moment of inertia of a solid disk/cylinder
I = (1/2)*M*$R^2$ about its central axis.
Conservation of angular momentum example
A spinning skater pulling arms inward decreases I, so omega increases to keep L = I*omega constant.
Static equilibrium condition
An object is in static equilibrium only if BOTH the net force is zero AND the net torque about any pivot is zero.

Unit 5: Momentum

Momentum
The product of an object's mass and velocity, p = mv; a vector quantity measured in kg·m/s.
Impulse
The change in momentum caused by a net force acting over a time interval: J = FΔt = Δp.
Conservation of Momentum
In an isolated system with no net external force, total momentum before an event equals total momentum after.
Elastic Collision
A collision in which both total momentum and total kinetic energy are conserved.
Inelastic Collision
A collision in which momentum is conserved but kinetic energy is not; some energy converts to heat, sound, or deformation.
Perfectly Inelastic Collision
A collision where the colliding objects stick together and move with a common final velocity: m1v1+m2v2=(m1+m2)$v_f$.
Impulse-Momentum Theorem
States that the impulse delivered to an object equals its change in momentum, connecting force-time behavior to velocity change.
Center of Mass
The mass-weighted average position of a system, which moves at constant velocity unless acted on by a net external force, unaffected by internal collisions or explosions.
Recoil
The backward momentum of an object (e.g., a gun) that results from conservation of momentum when it propels another object (e.g., a bullet) forward.
Force-Time Graph
A graph whose area under the curve equals the impulse delivered to an object during that time interval.

Unit 6: Energy & Work

Work
The energy transferred by a force acting through a displacement: W = Fd cosθ, measured in joules.
Work-Energy Theorem
The net work done on an object equals its change in kinetic energy: $W_{net}$ = ΔKE.
Kinetic Energy
The energy of motion, KE = ½mv²; proportional to mass and to the square of speed.
Elastic Potential Energy
Energy stored in a stretched or compressed spring, $U_s$ = ½kx², where k is the spring constant and x the displacement from equilibrium.
Conservation of Mechanical Energy
In the absence of non-conservative forces, KE + PE remains constant throughout a system's motion.
Power
The rate of doing work or transferring energy, P = W/t = Fv cosθ, measured in watts (J/s).
Conservative Force
A force (like gravity or spring force) whose work done is path-independent, allowing a potential energy to be defined.
Hooke's Law
The restoring force of an ideal spring: F = −kx, proportional and opposite to the displacement from equilibrium.
Non-Conservative Force
A force like friction whose work depends on the path taken, converting mechanical energy into other forms such as heat.

Unit 7: Electrostatics & Circuits

Coulomb's Law
F = k*q1*q2/$r^2$, where k = 8.99x10^9 N*$m^2/C^2$; describes the electrostatic force between two point charges.
Electric field
E = F/q = k*Q/$r^2$ (from a point charge), the force per unit positive test charge; units N/C.
Electric potential
V = U/q, measured in volts (J/C); potential difference (voltage) drives current flow between two points.
Ohm's Law
V = IR, relating voltage, current, and resistance for ohmic materials.
Resistance of a wire
R = rho*L/A, increasing with length and resistivity, decreasing with cross-sectional area.
Electric power in a circuit
P = IV = $I^2$*R = $V^2/R$, the rate of electrical energy transfer or dissipation.
Series circuit rule
Resistors in series share the same current; $R_{eq} = R1 + R2$ + ...; voltage divides among them.
Parallel circuit rule
Resistors in parallel share the same voltage; 1/$R_{eq} = 1/R1 + 1/R2$ + ...; current divides among them.
Kirchhoff's Junction Rule
The total current entering a junction equals the total current leaving it (conservation of charge).
Kirchhoff's Loop Rule
The sum of voltage changes around any closed circuit loop equals zero (conservation of energy).

Unit 8: Magnetism

Force on a moving charge
F = qvB sinθ; maximum when v is perpendicular to B, zero when parallel to B.
Force on a current-carrying wire
F = BIL sinθ; direction given by the right-hand rule using the current direction.
Magnetic field of a straight wire
B = μ₀I/(2πr), μ₀ = 4π×10⁻⁷ T·m/A; field lines form circles around the wire.
Right-hand rule (force)
Point fingers along v, curl toward B; thumb gives F for a positive charge (reverse for negative).
Radius of circular motion in a field
r = mv/(qB), from setting the magnetic force equal to the centripetal force requirement.
Faraday's Law
Induced EMF = −N(ΔΦ/Δt); an EMF is induced only by a CHANGING magnetic flux.
Lenz's Law
The induced current flows in the direction that opposes the change in flux that produced it.
Generator vs. motor
A generator converts mechanical energy to electrical energy; a motor does the reverse.
Like vs. unlike magnetic poles
Like poles (N-N, S-S) repel; unlike poles (N-S) attract — magnetic poles always come in N-S pairs.
Parallel current-carrying wires
Wires with current in the same direction attract; opposite directions repel.

Unit 9: Waves & Sound

Wave equation
v = f*lambda, relating wave speed, frequency, and wavelength; frequency is set by the source and does not change across media.
Wave speed on a string
v = $sqrt{F_T/mu}$, where $F_T$ is string tension and mu is linear mass density (mass per length).
Constructive interference
Occurs when waves meet in phase (path difference = n*lambda), producing a larger combined amplitude.
Destructive interference
Occurs when waves meet out of phase (path difference = (n+1/2)*lambda), reducing or canceling amplitude.
Standing wave on a string fixed at both ends
Harmonic frequencies $f_n = n$*v/(2L) for n = 1, 2, 3,...; supports all integer harmonics.
Standing wave in a pipe closed at one end
Only odd harmonics exist: $f_n = n$*v/(4L) for n = 1, 3, 5,...
Doppler effect
The observed frequency shifts when source and observer move relative to each other: frequency rises on approach, falls on recession.
Beat frequency
$f_{beat}$ = |f1 - f2|, the periodic loudness variation heard when two waves of close but different frequencies interfere.
Speed of sound in air
Approximately 343 m/s at room temperature; sound is a longitudinal wave requiring a medium to travel.
Decibel scale for sound intensity
beta = 10*log10(I/I0), where I0 = $10^{-12}$ W/$m^2$ is the threshold of human hearing.

Unit 10: Optics

Law of reflection
Angle of incidence = angle of reflection, both measured from the normal.
Mirror/lens equation
1/dₒ + 1/dᵢ = 1/f, relating object distance, image distance, and focal length.
Magnification
m = −dᵢ/dₒ = hᵢ/hₒ; negative m means inverted, |m|>1 means magnified.
Snell's Law
n₁ sinθ₁ = n₂ sinθ₂, where n = c/v is the index of refraction of each medium.
Index of refraction
n = c/v; light bends toward the normal entering a higher-n (denser) medium.
Critical angle
sinθc = n₂/n₁ (going from higher n to lower n); beyond θc, total internal reflection occurs.
Concave mirror image types
Object beyond f: real, inverted image. Object inside f: virtual, upright, magnified image.
Convex mirror/diverging lens
Always produce a virtual, upright, reduced image, regardless of object distance.
Converging lens (object inside f)
Produces a virtual, upright, magnified image — the principle behind a magnifying glass.
Dispersion
Index of refraction depends slightly on wavelength, so a prism spreads white light into a spectrum (violet bends most, red least).

Unit 11: Modern Physics

Photon energy
E = hf = hc/λ, where h = 6.63×10⁻³⁴ J·s (Planck's constant).
Photoelectric effect (KEmax)
KEmax = hf − φ, where φ is the metal's work function; increasing intensity increases electron count, not KEmax.
De Broglie wavelength
λ = h/p = h/(mv); every moving particle has an associated wavelength.
Atomic energy levels
Electrons occupy discrete, quantized energy levels; transitions absorb/emit photons with E = |ΔE|.
Alpha decay
Emits a helium nucleus; mass number drops by 4, atomic number drops by 2.
Beta-minus decay
A neutron converts to a proton, emitting an electron; atomic number increases by 1, mass number unchanged.
Gamma decay
Emits a high-energy photon; neither mass number nor atomic number changes.
Half-life
N = N₀(1/2)^(t/T); the time for half of a radioactive sample to decay, independent of sample size.
Mass-energy equivalence
E = mc²; the mass defect in a nuclear reaction converts into released energy.
Fission vs. fusion
Fission splits a heavy nucleus into lighter ones; fusion combines light nuclei into a heavier one — both release energy.
Press A–D to answer · Enter for next

Worked Examples

Try each problem on your own first — then reveal the solution one step at a time. Mark “Got it” to track your progress.

Unit 1: Kinematics

Kinematics without time
A car accelerates from rest at 3.0 m/s² over 24 m. Find its final speed.
Projectile range
A ball is launched at 20 m/s at 60° above level ground. Find its range. (g = 9.8 m/s²)
Dropped stone: speed and drop height
A stone is dropped from rest from a bridge and hits the water after 3.0 s. Find its speed on impact and the height of the bridge. Use g = 9.8 m/s².
Ball thrown straight up
A ball is thrown straight up at 19.6 m/s. Find the time to the top, the maximum height and the total time in the air. Use g = 9.8 m/s².
Reaction time from a dropped ruler
A student catches a falling ruler after it drops 15 cm. Find the reaction time. Use g = 9.8 m/s².
Area under a velocity–time graph
A cart speeds up uniformly from rest to 6.0 m/s in 2.0 s, moves at 6.0 m/s for 3.0 s, then slows uniformly to rest in 3.0 s. Find each acceleration and the total displacement.
Braking distance from a velocity–time graph
A car moving at 12 m/s brakes uniformly to rest in 6.0 s. Find its acceleration and the distance it travels while stopping.
Reading an acceleration–time graph
An object starts from rest and has a = +2.0 m/s² for 3.0 s, then a = 0 for 2.0 s, then a = −3.0 m/s² for 2.0 s. Find its velocity at the end of each stage.
Finding g from a graph of d versus t²
A graph of the distance fallen against t² for a dropped object is a straight line with slope 4.9 m/s². Find g.
Where a ball is at a given height
A ball is thrown straight up at 24.5 m/s. At what times is it 20 m above the launch point? Use g = 9.8 m/s².
Average speed over two legs
You drive 90 km at 45 km/h and then 90 km at 90 km/h. Find the average speed for the whole trip.
Stopping distance and speed
A car moving at 20 m/s brakes with a = −4.0 m/s². Find the stopping distance and the stopping time. Then find the stopping distance from 40 m/s.
A lap and displacement
A runner completes one lap of a 500 m track in 100 s. Find the distance, displacement, average speed and average velocity.
Velocity that reverses
A velocity–time graph is a straight line from +8.0 m/s to −8.0 m/s over 4.0 s. Find the acceleration and describe the motion at t = 2.0 s.

Unit 2: Dynamics & Newton's Laws

Block on an incline
A frictionless incline is 30°. Find a block's acceleration down the slope.

Unit 3: Circular Motion & Gravity

Minimum speed at the top of a loop
A car drives a vertical loop of radius 10 m. Find the minimum speed at the top to stay on the track.

Unit 4: Rotational Motion

Torque
A 20 N force acts perpendicular to a 0.50 m wrench. Find the torque.

Unit 5: Momentum

Perfectly inelastic collision
A 2.0 kg cart moving at 3.0 m/s hits a stationary 3.0 kg cart and they stick. Find the final speed.

Unit 6: Energy & Work

Energy and speed
A 2.0 kg object falls from rest through 20 m (no air resistance). Find its speed at the bottom.

Unit 7: Electrostatics & Circuits

Parallel resistors
A 6 Ω and a 3 Ω resistor are in parallel. Find the equivalent resistance.
Electric power
A 12 V source drives 2.0 A through a resistor. Find the resistance and power.

Unit 8: Magnetism

Magnetic force
A proton (q = 1.6×10⁻¹⁹ C) moves at 2.0×10⁶ m/s perpendicular to a 0.50 T field. Find the force.

Unit 9: Waves & Sound

Wave speed
A wave has frequency 440 Hz and wavelength 0.78 m. Find its speed.

Unit 10: Optics

Thin lens
An object is 30 cm from a converging lens of focal length 10 cm. Find the image distance.

Unit 11: Modern Physics

Photon energy
Find the energy of a 500 nm photon in eV. (hc = 1240 eV·nm)

Games

Popular games rebuilt around this guide's terms. No timers and no rankings.

More games are on the way.

Unit 1: Kinematics

Position, Displacement & Distance
Position locates an object relative to an origin; displacement is the vector change in position, while distance is the scalar path length traveled.
Velocity & Acceleration
Velocity is the rate of change of position; acceleration is the rate of change of velocity.
Average Speed Over Several Legs & Unit Conversion
Average speed always comes from total distance and total time, never from averaging two speeds. Converting units correctly is half the battle on real problems.
Speeding Up or Slowing Down: Signs of Velocity and Acceleration
Whether an object speeds up or slows down depends on how the signs of its velocity and acceleration compare, not on the sign of the acceleration alone.
Uniform Motion & Constant Velocity
Uniform motion is motion with constant velocity: the speed does not change and neither does the direction.
Position–Time Graphs: Slope Is Velocity
A position–time graph tells the whole story of where an object is. Its slope is the object’s velocity.
Velocity–Time Graphs: Slope and Area
A velocity–time graph links three quantities: its height is velocity, its slope is acceleration and the area under it is displacement.
Linking the Three Motion Graphs
Position, velocity and acceleration graphs describe the same motion. Taking a slope moves you one step down the chain, and taking an area moves you one step back up.
Kinematic Equations (Constant Acceleration)
For motion with constant acceleration, four kinematic equations relate displacement, velocity, acceleration, and time.
Choosing a Kinematic Equation
Each constant-acceleration equation leaves out exactly one of the five variables. Choosing the right one is a matter of listing what you know and what you want.
Stopping Distance and Speed Squared
Braking problems show why speed matters so much: the stopping distance grows with the square of the speed.
Free Fall and the Acceleration of Gravity
An object in free fall is moving under the influence of gravity alone. Near Earth’s surface every such object has the same acceleration, no matter its mass.
Free-Fall Equations: Dropped Objects
Free fall is constant-acceleration motion with a = ±9.8 m/s², so the kinematic equations apply directly.
Objects Thrown Vertically
A ball thrown straight up slows on the way up, stops for an instant, and speeds up on the way down, all with the same downward acceleration.
Reaction Time with a Falling Ruler
A dropped ruler turns free fall into a stopwatch: how far it falls before you catch it tells you your reaction time.
Free Fall & Projectile Motion
Free fall is motion under gravity alone (a = −9.8 m/s² near Earth's surface); projectile motion combines horizontal (constant velocity) and vertical (constant acceleration) motion independently.
Graphical Analysis of Motion
Position, velocity, and acceleration graphs are linked through slope and area relationships.
Relative Motion & Vectors in 2D
Vector quantities in kinematics (displacement, velocity, acceleration) must be added using vector addition, and can be decomposed into perpendicular components.
Kinematics: Common Mistakes
Most lost points in kinematics come from a short list of repeated slips. Check your work against it.
Kinematics Formula Sheet & Checklist
One page to review before a quiz: the equations, the graph rules and a short checklist.
Key fact
v = v₀ + at, Δx = v₀t + ½at², v² = v₀² + 2aΔx, Δx = ½(v₀+v)t
Key fact
g = 9.8 m/s² (downward) near Earth's surface for all free-falling objects
Key fact
Slope of x-t graph = velocity; slope of v-t graph = acceleration; area under v-t graph = displacement
Key fact
Projectile motion: horizontal velocity constant, vertical acceleration = −g, time is shared between axes

Unit 2: Dynamics & Newton's Laws

Newton's First Law (Inertia)
An object remains at rest or in uniform motion unless acted on by a net external force.
Newton's Second Law (F = ma)
The net force on an object equals its mass times its acceleration, and acceleration is in the direction of the net force.
Newton's Third Law
For every action force there is an equal and opposite reaction force acting on a different object.
Common Forces: Weight, Normal, Tension, Friction
Several named forces recur throughout dynamics problems and each has a specific formula and direction.
Inclined Planes & Multi-Body Systems
On an incline, gravity is decomposed into components parallel and perpendicular to the surface; connected objects (via strings/pulleys) share acceleration magnitude.
Applications: Elevators & Apparent Weight
Apparent weight (the normal force felt) differs from true weight when an object accelerates vertically, as in an elevator.
Key fact
ΣF = ma (Newton's Second Law) — net force determines acceleration
Key fact
Newton's Third Law pairs act on different objects, equal magnitude, opposite direction
Key fact
$f_s$(max) = $μ_s$ N, $f_k = μ_k$ N — friction is proportional to the normal force
Key fact
On a frictionless incline: a = g sinθ; N = mg cosθ

Unit 3: Circular Motion & Gravity

Uniform Circular Motion & Centripetal Acceleration
An object moving in a circle at constant speed still accelerates because its velocity direction constantly changes; this acceleration points toward the center of the circle.
Centripetal Force
Centripetal force is not a new type of force but the net force directed toward the center that causes circular motion; it must be supplied by real forces (tension, gravity, friction, normal force).
Vertical Circular Motion
When circular motion occurs in a vertical plane, gravity adds to or subtracts from the required centripetal force depending on position in the loop.
Newton's Law of Universal Gravitation
Every pair of masses attracts each other with a force proportional to the product of their masses and inversely proportional to the square of the distance between their centers.
Orbital Motion
A satellite or planet in a stable circular orbit has gravity acting as the sole centripetal force, which links orbital speed and period to the orbit's radius.
Kepler's Laws & Gravitational Potential Energy
Kepler's laws describe planetary orbits, and gravitational potential energy (defined as zero at infinite separation) is always negative for a bound system.
Key fact
$a_c = v$²/r = ω²r (always toward center); $F_c = mv$²/r is the net radial force, not an extra force
Key fact
$F_g$ = Gm₁m₂/r², G = 6.674×10⁻¹¹ N·m²/kg²
Key fact
Orbital speed v = √(GM/r); orbital period T = 2π√(r³/GM); Kepler's Third Law: T² ∝ r³
Key fact
Minimum speed at top of vertical loop: $v_{min}$ = √(gr); gravitational PE: $U_g$ = −GMm/r

Unit 4: Rotational Motion

Rotational Kinematics
Rotational motion uses angular analogues of the linear kinematic quantities and equations, connected to linear quantities through the radius.
Torque
Torque is the rotational analogue of force — it measures how effectively a force causes angular acceleration about a pivot, depending on both the force and where/how it's applied.
Moment of Inertia
Moment of inertia is the rotational analogue of mass — it measures an object's resistance to changes in angular velocity, depending on both mass and how that mass is distributed relative to the axis.
Rotational Dynamics & Equilibrium
Newton's second law has a rotational form relating net torque to angular acceleration, and static equilibrium requires both zero net force and zero net torque.
Angular Momentum & Its Conservation
Angular momentum is the rotational analogue of linear momentum, and it is conserved for a system when there is no net external torque.
Rotational Kinetic Energy & Rolling Motion
A rotating object stores kinetic energy in its rotation, and a rolling object has both translational and rotational kinetic energy.
Key fact
τ = rF sinθ; Στ = Iα (rotational analogue of ΣF = ma)
Key fact
I = Σmr² (point masses); common shapes: disk ½MR², hoop MR², sphere ₅⁄₂MR², rod about center ¹⁄₁₂ML²
Key fact
L = Iω, conserved when net external torque is zero
Key fact
Rotational KE = ½Iω²; rolling object KE = ½Mv² + ½Iω² (using v = ωr)

Unit 5: Momentum

Momentum & Impulse
Momentum is the product of mass and velocity, and impulse is the change in momentum caused by a force acting over time.
Conservation of Momentum
In an isolated system (no external net force), total momentum before an interaction equals total momentum after.
Elastic vs. Inelastic Collisions
Collisions are classified by whether kinetic energy is conserved in addition to momentum.
Solving Collision Problems
Collision problems use conservation of momentum (always) and conservation of kinetic energy (only if elastic) as simultaneous equations.
Center of Mass
The center of mass is the weighted average position of a system's mass, and it moves according to the net external force on the whole system.
2D Momentum & Real-World Applications
Momentum conservation extends to two dimensions by conserving x- and y-components independently, applicable to collisions, sports, and vehicle safety design.
Key fact
p = mv; Impulse J = FΔt = Δp
Key fact
Momentum is conserved in isolated systems: $Σp_{before} = Σp_{after}$
Key fact
Elastic collisions conserve both momentum and KE; inelastic collisions conserve only momentum
Key fact
Perfectly inelastic collision: m1v1 + m2v2 = (m1+m2)$v_f$

Unit 6: Energy & Work

Work Done by a Force
Work is the transfer of energy via a force acting through a displacement, and depends on the angle between force and displacement.
Kinetic Energy & the Work-Energy Theorem
Kinetic energy is the energy of motion, and the net work done on an object equals its change in kinetic energy.
Potential Energy: Gravitational & Elastic
Potential energy is stored energy associated with an object's position or configuration, recoverable as kinetic energy.
Conservation of Mechanical Energy
In the absence of non-conservative forces (like friction), total mechanical energy (KE + PE) remains constant.
Power
Power is the rate at which work is done or energy is transferred.
Energy Diagrams & Systems
Energy bar charts and system diagrams track how energy transforms and transfers between kinetic, potential, and thermal forms.
Key fact
W = Fd cosθ; $W_{net}$ = ΔKE (work-energy theorem)
Key fact
KE = ½mv²; $U_g$ = mgh; $U_{spring}$ = ½kx²
Key fact
Conservation of mechanical energy (no friction): $KE_i + PE_i = KE_f + PE_f$
Key fact
Power P = W/t = Fv cosθ; units are watts (J/s)

Unit 7: Electrostatics & Circuits

Electric Charge & Coulomb's Law
Electric charge is a fundamental property of matter that comes in two types (positive and negative), and Coulomb's law describes the force between two point charges.
Electric Fields
An electric field is the region around a charge where another charge would feel a force, defined as force per unit charge.
Electric Potential Energy & Potential
Electric potential energy is the energy stored due to the position of a charge in a field, and electric potential is potential energy per unit charge.
Current, Resistance & Ohm's Law
Electric current is the rate of charge flow through a conductor, and Ohm's law relates voltage, current, and resistance for many materials.
Series & Parallel Circuits
Resistors combine differently depending on whether they are connected in series (single path) or parallel (multiple paths), affecting current, voltage, and equivalent resistance.
Kirchhoff's Rules & Circuit Analysis
Kirchhoff's rules formalize conservation of charge and energy in circuits, allowing analysis of complex multi-loop networks.
Key fact
Coulomb's Law: F = kq₁q₂/r², k = 8.99×10⁹ N·m²/C²; E = F/q = kQ/r²
Key fact
Ohm's Law: V = IR; Power P = IV = I²R = V²/R
Key fact
Series: $R_{eq}$ = R₁+R₂+...; same I. Parallel: 1/$R_{eq} = 1$/R₁+1/R₂+...; same V
Key fact
Kirchhoff's rules: $ΣI_{in} = ΣI_{out}$ (junction); ΣΔV = 0 around a closed loop

Unit 8: Magnetism

Magnetic Fields & Field Lines
A magnetic field is a region where a moving charge or current experiences a force; field lines show its direction and relative strength.
The Right-Hand Rule
The right-hand rule gives the direction of a magnetic field or force whenever velocity, current, or field direction are mutually perpendicular.
Force on a Moving Charge
A magnetic field exerts a force on a moving charge, but only on the velocity component perpendicular to the field.
Force on a Current-Carrying Wire
Since current is charge in motion, a current-carrying wire in a magnetic field experiences a force.
Magnetic Field of a Current-Carrying Wire
A current-carrying wire generates its own magnetic field circling around it, and coils of wire concentrate this field.
Electromagnetic Induction
A changing magnetic flux through a loop induces an EMF (Faraday's Law), and the induced current opposes that change (Lenz's Law) — the basis of generators.
Key fact
Force on a moving charge: F = qvB sinθ; force on a wire: F = BIL sinθ
Key fact
Field of a long straight wire: B = μ₀I/(2πr), μ₀ = 4π×10⁻⁷ T·m/A
Key fact
Radius of circular motion in a field: r = mv/(qB)
Key fact
Faraday's Law: EMF = −N(ΔΦ/Δt); Lenz's Law: induced current opposes the change in flux

Unit 9: Waves & Sound

Wave Properties & the Wave Equation
Waves transfer energy without net transfer of matter, and their properties are related through a single equation connecting speed, wavelength, and frequency.
Superposition & Interference
When two or more waves overlap in the same medium, their displacements add algebraically (superposition), producing constructive or destructive interference.
Standing Waves & Resonance
Standing waves form when two identical waves traveling in opposite directions interfere, creating fixed points of no displacement (nodes) and maximum displacement (antinodes).
Sound Waves
Sound is a longitudinal pressure wave that requires a medium to travel, with speed depending on the properties of that medium.
The Doppler Effect
The Doppler effect is the change in observed frequency of a wave when there is relative motion between the source and the observer.
Wave Behavior at Boundaries
When a wave reaches a boundary between media, part of it reflects and part transmits, with the details depending on the relative properties of the two media.
Key fact
v = fλ; wave speed on a string v = √($F_T/μ$); frequency is set by the source and unchanged across media
Key fact
String fixed at both ends / open-open pipe: $f_n = nv$/(2L); closed-open pipe: $f_n = nv$/(4L), odd n only
Key fact
Doppler effect: $f_{observed} = f_{source}$(v ± $v_{obs}$)/(v ∓ $v_{src}$); approach raises frequency, recession lowers it
Key fact
Constructive interference: path difference = nλ; destructive interference: path difference = (n+½)λ

Unit 10: Optics

Reflection & Plane Mirrors
The law of reflection governs how light bounces off a surface, and plane mirrors use it to form images.
Curved Mirrors
Concave mirrors curve inward and can form real or virtual images; convex mirrors curve outward and always form virtual, reduced images.
The Mirror Equation & Magnification
The mirror equation relates object distance, image distance, and focal length; magnification compares image and object size.
Refraction & Snell's Law
Refraction is the bending of light as it passes between media with different indices of refraction, due to a change in speed.
Total Internal Reflection
When light travels from a denser to a less dense medium at a steep enough angle, it reflects entirely back into the denser medium instead of refracting out.
Lenses & Dispersion
Lenses refract light to form images using the same equations as mirrors; dispersion splits light into its component colors because n depends on wavelength.
Key fact
Law of reflection: θᵢ = θᵣ; mirror/lens equation: 1/dₒ + 1/dᵢ = 1/f; magnification m = −dᵢ/dₒ
Key fact
Snell's Law: n₁ sinθ₁ = n₂ sinθ₂; n = c/v
Key fact
Critical angle for total internal reflection: sinθc = n₂/n₁ (going from higher n to lower n)
Key fact
Converging lens/concave mirror: real+inverted image beyond f, virtual+upright+magnified inside f. Diverging lens/convex mirror: always virtual, upright, reduced

Unit 11: Modern Physics

Wave-Particle Duality & the Photoelectric Effect
Light exhibits both wave and particle behavior; the photoelectric effect — where light ejects electrons from a metal — can only be explained by treating light as discrete photons.
De Broglie Wavelength
Just as light exhibits particle behavior, matter exhibits wave behavior — every moving particle has an associated wavelength.
Atomic Spectra & Energy Levels
Electrons in an atom can only occupy specific, quantized energy levels; transitions between levels absorb or emit photons of specific energies.
Nuclear Decay
Unstable nuclei spontaneously emit particles or radiation to become more stable, transforming into different nuclides in the process.
Half-Life
Half-life is the time required for half of a sample of radioactive nuclei to decay, and it is constant regardless of the sample size.
Mass-Energy Equivalence, Fission & Fusion
Mass and energy are equivalent (E = mc²); nuclear reactions convert a small amount of mass into a large amount of energy.
Key fact
Photon energy: E = hf = hc/λ; photoelectric effect: KEmax = hf − φ
Key fact
De Broglie wavelength: λ = h/p = h/(mv)
Key fact
Half-life decay: N = N₀(1/2)^(t/T)
Key fact
Mass-energy equivalence: E = mc²; both fission and fusion release energy from a mass defect

Memory Tricks

Common mistakes for each unit — read the mistake, then make sure you know why it's wrong.

Unit 1: Kinematics

Watch out
Velocity and acceleration can point in different directions (deceleration is negative-signed a relative to v, not always 'negative a'), not 'acceleration always means speeding up'
Watch out
At the top of a projectile's path, vertical velocity is zero but vertical acceleration is still −g, not zero
Watch out
Distance traveled equals |displacement| only for one-directional motion, not always equal in general
Watch out
A steeper x-t graph means greater speed, not greater position; curvature (not steepness alone) indicates acceleration

Unit 2: Dynamics & Newton's Laws

Watch out
A moving object needs a net force only to change its velocity, not to keep moving at constant velocity ('no force needed to sustain motion' is correct, not 'motion requires continuous force')
Watch out
Action-reaction pairs act on two different objects and never cancel each other for a single free-body diagram, not 'forces on the same object cancel'
Watch out
Normal force is not always equal to mg — it depends on other forces and acceleration (e.g., on an incline or in an elevator), not a fixed value
Watch out
Static friction is a variable up to a maximum ($μ_s$ N), not always exactly $μ_s$ N

Unit 3: Circular Motion & Gravity

Watch out
Centripetal force is the net inward force supplied by real forces (tension, gravity, friction, normal), not a separate force you add to a free-body diagram
Watch out
If centripetal force disappears, an object flies off tangent to the circle (in a straight line), not radially outward
Watch out
Orbital speed and period depend only on the central mass and orbital radius, not on the orbiting satellite's own mass
Watch out
Doubling the orbital radius does NOT halve the orbital speed — v ∝ 1/√r, so speed decreases by a factor of √2

Unit 4: Rotational Motion

Watch out
Torque depends on where a force is applied and its angle to the lever arm, not just its magnitude — a large force applied along the lever arm produces zero torque
Watch out
Moment of inertia depends on the axis of rotation, not just the object's mass — the same object has different I values about different axes
Watch out
Angular momentum conservation applies even when kinetic energy is not conserved, not 'both are always conserved together'
Watch out
Rolling without slipping requires $v_{cm} = ωr$; a sliding (skidding) object does not satisfy this relationship

Unit 5: Momentum

Watch out
Kinetic energy is generally NOT conserved in real-world (inelastic) collisions, even though momentum always is, not 'both are always conserved together'
Watch out
Momentum is a vector — velocities in opposite directions must be given opposite signs, not treated as simply additive magnitudes
Watch out
A larger force isn't needed for a bigger impulse if time increases proportionally — impulse depends on both F and Δt, not force alone
Watch out
The center of mass of a system continues on its original path during an internal explosion or collision (external force unchanged), not 'the pieces ignore the original motion'

Unit 6: Energy & Work

Watch out
Work done by a force perpendicular to displacement is zero, not simply 'less work' — cosθ=0 makes it exactly zero (e.g., normal force does no work on a moving object)
Watch out
Potential energy is only meaningful as a difference/change (ΔPE), not an absolute value — the reference point is arbitrary
Watch out
Kinetic energy depends on speed squared, so doubling velocity quadruples KE, not just doubles it
Watch out
Friction converts mechanical energy to thermal energy (it doesn't destroy energy) — total energy is still conserved, only mechanical energy decreases

Unit 7: Electrostatics & Circuits

Watch out
Adding a resistor in parallel decreases total resistance (creates another path for current), not increases it like adding one in series
Watch out
Current is the same through every resistor in series, not the voltage — voltage divides; in parallel, voltage is the same and current divides
Watch out
Equivalent resistance of resistors in parallel is always less than the smallest individual resistor, not an average of the values
Watch out
Conventional current direction (+ to −) is opposite to the actual direction electrons move, which matters when interpreting circuit diagrams

Unit 8: Magnetism

Watch out
The magnetic force on a moving charge does no work and cannot change its speed — only its direction, since F is always perpendicular to v
Watch out
A charge moving parallel (or antiparallel) to B feels zero magnetic force, not maximum force — maximum force occurs at 90°
Watch out
Lenz's Law is about opposing the CHANGE in flux, not opposing the flux itself — a steady, unchanging flux induces no EMF at all
Watch out
The right-hand rule (not left-hand) is used for conventional current and positive charges; use it carefully in reverse for negative charges

Unit 9: Waves & Sound

Watch out
Wave frequency is determined by the source and stays the same when a wave enters a new medium — wavelength and speed change, not frequency
Watch out
A closed-open pipe only supports odd harmonics ($f_n = nv/4$L, n=1,3,5...), unlike an open-open pipe or a string, which supports all integer harmonics
Watch out
The Doppler effect changes the observed frequency, not the actual wave speed through the medium
Watch out
Sound cannot travel through a vacuum because it is a mechanical (longitudinal) wave requiring a medium, unlike light

Unit 10: Optics

Watch out
A virtual image is not fainter or fake — it looks completely real to an observer, it just can't be projected onto a screen because rays only appear to diverge from it
Watch out
Light bends TOWARD the normal entering a denser medium and AWAY from the normal entering a less dense one — mixing this up flips every refraction diagram
Watch out
Total internal reflection requires going from higher n to lower n; light can never totally internally reflect when entering a denser medium
Watch out
Frequency (and color) of light never changes when it refracts — only its speed and wavelength change, which is why a ray stays the same color across a boundary

Unit 11: Modern Physics

Watch out
Increasing light intensity increases the NUMBER of photoelectrons, not their maximum kinetic energy — only increasing frequency increases KEmax
Watch out
Below the threshold frequency, no electrons are ejected no matter how intense the light is — intensity cannot substitute for insufficient photon energy
Watch out
In beta-minus decay the atomic number increases (a neutron becomes a proton), even though no proton was 'added' from outside the nucleus
Watch out
Half-life does not mean 'the sample is gone after two half-lives' — after 2 half-lives, 1/4 remains, not zero; it approaches zero asymptotically but never mathematically reaches it